User's Manual

PHILIO Z-Wave Utility Manual
7.2.Exclude Device
Remove the Z-Wave device from the Z-Wave network, the controller should
exclude it.
To execute the exclusion operation, please press the “Exclude” button.
The all buttons of the main function part will be disabled. And the controller
will into to the exclusion mode. If you want to abort the exclude operation,
please press the “Abort” button in the controller function part.
Figure 8 Controller into exclusion mode
Now remove the device from the controller, press the learning key three
times. If the controller got the message, the controller will remove it.
The all buttons of the main function part will recover, and in the device list
part will remove that device record. The message part will show a device was
removed, and which node id it is.
Philio Technology Corporation Page 13
CONFIDENTIAL