User's Manual

PHILIO Z-Wave Utility Manual
send button, the command will send to the device instantly, otherwise, please
don't check it. And after you click the send button, the application will put the
command into the queue, wait the device to wake up, or got the node
information from that device. When it happen, the application will send out
the command, those in the queue.
Another option is “Enable Route”, if this option be checked, the command will
be sending by the route table path. That means the command maybe send to
other node first, and pass to more than one node, at the end to the
destination node. Otherwise, the command will send directly to the
destination node.
Figure 14 Check the options
Select the command type that you want to send, and fill the arguments. Each
command has define different arguments, Please refer to the Z-Wave SDK to
get more detail specification.
Some command type there is a number in the head that means the version of
that command type. 2 means version 2.
Philio Technology Corporation Page 18
CONFIDENTIAL