User's Manual

PHILIO Z-Wave Utility Manual
Figure 17 Consistent Setting
You can choose send the NOP command or the basic command.
The interval field is for setting the interval time between each command.
The repeat field is for setting how many commands will be sent.
Figure 18 Using the basic command
If you choose the basic command, you also can choose the basic value.

On: 255

Max: 99

Off: 0
Click the “start” button to start the testing. There are two way to trigger the
consistent test. One is let the device send out the NIF(Node Information),
another is select the device from the left side “Device List”, and the presss the
“Manual” button. When the consistent test start, the controller will
Philio Technology Corporation Page 20
CONFIDENTIAL