Cut Sheet

Revised 06/29/1999
Data is based upon tests performed by Philips Lighting Electronics N.A. in a controlled environment and is representative of relative performance. Actual performance can vary
depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted.
PHILIPS LIGHTING ELECTRONICS N.A.
10275 WEST HIGGINS ROAD · ROSEMONT, IL 60018
Tel: [phone] · Fax: [phone] · www.philips.com/advance
Customer Support/Technical Service: 800-372-3331 · OEM Support: 866-915-5886
H-2B13-TP-BLS
Brand Name COMPACT-HPF
Ballast Type Magnetic
Starting Method Pre-Heat
Lamp Connection Series
Input Voltage 120
Input Frequency 60 HZ
Status Active
Electrical Specifications
Lamp Type Num.
of
Lamps
Rated
Lamp Watts
Min. Start
Temp (°F/C)
Input
Current
(Amps)
Starting
Current
(Amps)
Open
Circuit
(Amps)
Input
Power
(Watts)
Ballast
Factor
MAX
THD
%
Power
Factor
* CFQ13W/GX23 2 13 32/00 0.30 0.44 0.00 35 1.02 30 0.95
CFT13W/GX23 2 13 32/00 0.30 0.44 0.00 35 1.02 30 0.95
Wiring Diagram
BALLAST
Diag. 51
LINE
WHITE
BLACK
BLUE
RED
The wiring diagram that appears above is
for the lamp type denoted by the asterisk (*)
Standard Lead Length (inches)
in. cm.
Black 7 17.8
White 0
Blue 7 17.8
Red 7 17.8
Yellow 0
Gray 0
Violet 0
in. cm.
Yellow/Blue 0
Blue/White 0
Brown 0
Orange 0
Orange/Black 0
Black/White 0
Red/White 0
Enclosure
H
W M
L
CASE "T"
Enclosure Dimensions
OverAll (L) Width (std)/(TP) Height (H) Mounting (M)
6.5 " 2.375 " 1.5 " 6.0 "
6 1/2 2 3/8 1 1/2 6
16.5 cm 6 cm / 0 cm 3.8 cm 15.2 cm