Baby Monitor User Manual
Dry materials Material thickness Loss of range
Metal grilles or bars < 0.4in/1cm 90-100%
Metal or aluminum sheets < 0.4in/1cm 100%
For wet and moist materials, the range loss may be up to 100%.
Features
The following features are described in chapter ‘Menu options’, as they can only be operated in the
menu of the parent unit:
Adjusting microphone sensitivity
Sound alert on/off
Setting room temperature range (minimum and maximum temperature)
Temperature alert on/off
Vibration alert on/off
Adjusting loudspeaker volume
1 Press the volume + or – button on the baby unit until the desired loudspeaker volume for
the baby unit has been reached (Fig. 23).
2 Press the volume + or – button on the parent unit until the desired loudspeaker volume for
the parent unit has been reached (Fig. 24).
The displays give visual feedback on the volume settings of the units:
g = parent unit volume switched off/silent baby monitoring
h = minimum volume (parent unit and baby unit)
i = maximum volume (parent unit and baby unit)
Note: If the volume is set to a high level, the units consume more power.
Talk function
You can use the TALK button on the parent unit to talk to your baby (e.g. to comfort your baby).
1 Press and hold the TALK button and talk clearly into the microphone from a distance of 6-
12in/15-30cm (Fig. 25).
The green LINK light starts ashing and the message ‘Talk’ appears on the display.
2 Release the TALK button when you have nished talking.
Sound level lights
The parent unit continuously monitors the sound level in your baby´s room and the sound level
lights let you know if there is any activity. If your baby cries, you see the sound level lights light up on
the parent unit.
As long as the baby unit does not detect a sound, all sound level lights on the parent unit are
out.
When the baby unit picks up a sound, one or more sound level lights on the parent unit go on.
The number of lights that go on is related to the loudness of the sound picked up by the baby
unit.
Nightlight
1 Press the nightlight button Q on the baby unit to switch on the nightlight. (Fig. 26)
Q appears on the display of the parent unit.
2 Press the nightlight button Q again to switch off the nightlight.
The nightlight dims gradually before it goes out completely.
-
-
-
-
-
,
-
-
-
,
-
-
,
,
ENGLISH 13