Operation Manual

How to clean and sterilise your pump

(see diagram A)

NEVER WASH OR STERILISE…

the control handle (a), battery pack (i)

or mains power lead (j).

These components DO NOT come

into contact with your breast milk.

You can wipe the control handle clean,

using a soft cloth.

Cleaning and sterilising the pump body

and breast milk storage components

Before you use your breast pump for the first time and every time fore use:

Separate all parts, then wash in the dishwasher or in warm soapy water and rinse.

Do not use antibacterial or abrasive cleaners/detergents.

Caution: Take care when cleaning the white valve. If it gets

damaged, your breast pump will not function properly. To clean

the white valve, rub it gently between your ﬁngers in warm

soapy water. Do not insert objects as this may cause damage.

Sterilise all parts in a Philips AVENT steam steriliser or by boiling for 5 minutes.

If using a Philips AVENT steam steriliser, the pump will remain sterile in the

steriliser for a minimum of 6 hours, provided the lid is not removed.

Keeping your pump sterilised

and compact for travel

After sterilising all parts, insert the white valve and diaphragm into

the pump body. Clip the funnel cover (h) over the funnel

and Let-down Massage Cushion (g) and screw the sealing base

(n) onto the pump body (d) in place of the milk container.

✓