Operation Manual

How to assemble your pump

(see diagram D)

1. With clean hands, insert the white valve (c) into the pump body (d) from the

bottom making sure that the pointed side of the valve faces downwards.

2. Twist the milk container (e) onto the pump body (d) until securely in place.*

3. To ensure the pump doesn’t topple, insert the 125ml/4oz milk container

into the stand provided (f).

4. Place the silicone diaphragm (b) into the pump body (d), making sure

it fits securely around the edge, to create a seal (this is easier if the

diaphragm is wet).

5. Carefully insert the Let-down Massage Cushion (g) into the pump body

(d), making sure it completely covers the edge of the funnel (this is easier

if the Let-down Massage Cushion is wet).

6. Firmly push the control handle (a) onto the pump body (d) so that it sits

securely on top of the silicone diaphragm (b).

7. For mains use connect the mains power lead (j) to the control handle (a)

and plug into an electrical wall socket.

8. For battery use, open the top of the battery pack (i) and insert 4 x AA

batteries. Connect the power lead to the control handle (a).

* ALWAYS insert the adapter ring when using a polypropylene bottle