Specifications

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

Before assembling, make sure that your hands are clean and you have correctly washed and

sanitized the pump (see ‘Cleaning the Manual Breast Pump’ on page 16). Also check that

none of the pump components are damaged.

Insert the white valve into the pump body so that

it fits securely into the small round hole. Make

sure the pointed side of the valve is facing down.

Screw the pump body onto the milk

container until securely in place.

Insert the Let-down Massage Cushion and secure

the rim around the funnel making sure there

are no gaps. Run your thumb on the flat surface

between each petal to ensure there are no air

pockets. (This is easier if assembled while the

Let-down Massage Cushion is wet).

Place the forked end of the handle under

the rounded tip of the diaphragm stem.

Push down gently on the handle until it

clicks into place.

Click the pump cover onto the pump body.

Fit the silicone diaphragm with stem into the

pump body. Ensure a perfect seal around the

rim by pressing down with your fingers. (This is

easier if assembled while the diaphragm is we

t).

Assembling the Manual Breast Pump

To ensure that the pump is completely

stable, you can use the stand with the

4oz/125ml milk container.

ALWAYS insert the adaptor ring when using a polypropylene bottle

white stand