Specifications

Need Help? Call us at 1.800.54.AVENT or visit www.philips.com/AVENT

To ensure that the pump is completely

stable, you can use the stand with the

4oz/125ml milk container.

ALWAYS insert the adaptor ring

when using a polypropylene bottle

Before assembling, make sure that your hands are clean and you have correctly washed and

sanitized the pump (see ‘Cleaning and Sanitizing Your Pump’ on page 7). Also check that none

of the pump components are damaged.

Assembling the Pump Body

Insert the white valve into the pump

body, so that it fits securely into the

small round hole. Make sure the pointed

side of the valve is facing down.

Fit the clear silicone diaphragm with stem into

the pump body. Ensure a perfect seal around the

rim by pressing down with your fingers. (This is

easier if assembled while the diaphragm is wet).

Screw the pump body onto the milk

container until securely in place.

Insert the Let-down Massage Cushion and

secure the rim around the funnel making sure

there are no gaps. Run your thumb on the flat

surface between each petal to ensure there are

no air pockets. (This is easier if assembled while

the Let-down Massage Cushion is wet).

Parts you will need for steps 1-4:

White valve Silicone diaphragm with stem

Let-down Massage Cushion White stand

Pump body

Milk container