User's Manual

2. Assigning IP address and Configuring administrator’s condition with Setup program
1) Starting Setup Program for NetCam-2
Click the “NetCam-2Setup.exe” file on
your PC. When the Setup Program is
executed, the setup program detects and
shows every NetCam-2 connected on the
local network.
From the NetCam-2s listed, select one to
assign a new IP address. (Default is
211.53.133.92). To choose a NetCam-2,
click on its MAC Address or IP addres
When a NetCam-2 is selected, its IP
address will appear in the ‘Selected IP
Address’ box. Type a password in the
“Admin’s Password” box to change the IP
address, reboot NetCam-2, or start
configuration. The default password is
“admin”.
IP Address Assigning Methods
n With setup program
• Assemble and place NetCam-2.
• Assign IP address to NetCam-2 using setup program on local network.
• Access NetCam-2 through Web browser with the IP address and configure user’
s condition
and administrator’s condition.
• If it is impossible to assign IP address with setup program, try it with ARP command.
n With ARP command
• Assemble and place NetCam-2.
• Assign IP address using ARP command on local network.
• Access NetCam-2 through Web browser with the IP address and configure user’s
condition
and administrator’s condition.