User's Manual

(1) Single View / Multi View
User can select a mode between single view and multi view. The button is toggled between the two functions.
Usages are same as normal viewer. Please refer to descriptions on normal viewer.
(2) Image Control
Functions are same as normal viewer. Please refer to descriptions on normal viewer.
(3) Camera Selection
Functions are same as normal viewer. Please refer to descriptions on normal viewer.
(4) Transmission Control
Functions are same as normal viewer. Please refer to descriptions on normal viewer.
(5) Play Control
Functions are same as normal viewer. Please refer to descriptions on normal vie wer. “Play” and “Stop”
functions are toggled on the same button.
(6) Other function buttons
Functions are same as normal viewer. Please refer to descriptions on normal viewer.
4) Real-time monitoring through server-push viewer
If NetCam-2 is installed on a network with a firewall, the server-push viewer will allow remote access to
real-time images. Once the server-push viewer is engaged from within the network, images can be viewed
over the Internet with the normal, simple, or default viewer. To do this, change either the Web TCP port or the
video TCP port. For more information about changing TCP port, please refer to Chapter VII “Configuring
Administrator’s Configuration at Homepage.”
(4)
(2)
(3)
(1)