User's Manual

(2) Model
By clicking ‘Detailed H/W Information’, administrator may view detailed hardware information such as
maximum numbers of channel, serial port, digital input, digital output, etc. The model name is marked
automatically.
(3) Installation Location & Additional Description
The information is to show in the real time image viewer page as well as in a dynamic IP registration list.
(4) Date & Time
There are three date & time menus. In “NetCam-2 Current Date & Time” panel, the date and time set in the
NetCam-2 appears. In “System (PC) Current Date & Time” panel, the same date and time set in user’s PC
appears. To synchronize the NetCam-2 and PC date and time, an administrator can click the “Time
Synchronization” button. The “Manual Date & Time” panel allows the user to set date and time.
(5) Administrator’s E-mail Address
In this panel, administrator records one’s e-mail address. If administrator put a ‘contact’ menu of e-mail
communication on real time image viewer page, the linked e-mail address to the ‘contact’ menu is to be
synchronized with this. So administrator can keep up e-mail address easily.
(6) Initialize Flash Info
This will initialize almost all the information saved on Flash Memory. “Date & Time,” “Model,” “Serial
Number,” IP configuration, passwords, and all items in “Video” menu will not be changed.
(7) Rebooting
If NetCam-2 has any problems, administrator can reboot it without adjusting power supply. This button works
as on/off switch.