User's Manual

5) How to find registered NetCam-2 in NetCam-2 Internet homepage
On WebGate Internet homepage (http://www.webgateinc.co.kr), there are menus to find NetCam-2 that is
registered on WRS (NetCam-2 Registration Server).
(1) Sign up membership
To search your NetCam-2 out of a public list or a private list, sign up membership first. You may sign up on
the server through ‘Membership’ menu.
(2) Finding NetCam-2 from public list
To access NetCam-2 that is registered on public list, you may find it through ‘NetCam-2 Service’ or ‘Public
NetCam-2 List’ menus. Once click ‘NetCam-2 Service’ or ‘Public NetCam-2 List’ menu, you may find
‘NetCam-2 list of WRS (NetCam-2 Registration Server)’.
You may search your NetCam-2 with several conditions such as name, model, location, description, serial
number, and IP address. (‘IP address’ is to be used only when you assigned your NetCam-2 a fixed IP
address)
After finding your NetCam-2, you may access it by clicking on the name. By clicking on ‘Preview’, you may
monitor real-time image from NetCam-2 without logging in NetCam-2. However ‘Preview’ is available only
when the NetCam-2 is configured to have its ID and password as default values ‘guest’ and ‘guest’.
(3) Finding NetCam-2 from private list
To access NetCam-2 that is registered on private list, you should make your own NetCam-2 list before. You
may make the list through ‘Searching NetCam-2’ menu of ‘NetCam-2 Service’. In the list, there are to be
registered any NetCam-2 from the ‘Public List’ or ‘Private List’.
My NetCam-2 List: You may maintain your own NetCam-2 registering it on this list. When you login this
homepage, WRS (NetCam-2 Registration Server) detects and shows all the NetCam-2s that you listed appear
on your own list. Therefore you may access any of them without searching it from WRS (NetCam-2
Registration Service) list nor verifying access token again. So it is very convenient to have the list when you
run several NetCam-2s having dynamic IP addresses.
Search and Append: This menu is to append a certain NetCam-2 on your own list. You may append
NetCam-2 on your own list as follows.
• Key in serial number (W100000000000), MAC address (e.g. 00:00:00:00:00:00), and access token of a
Private List and Access Token
You should set the access token if you configure your NetCam-
2 to register its
information on a private list at NetCam-2 Internet homepage (www.NetCam-2.to)
.
Otherwise you cannot access the private list nor find the information on your
NetCam-2.
Access token is to be set no more than 4 bytes. 4 bytes are equal to 4 English
characters.