User's Manual

Phenomenon of Malfunction
1. Network Malfunction
• Green LED blinks once at every 4 seconds
• Check if Ethernet cable is connected properly or the Network works.
2. Software Malfunction
• Green and yellow LEDs are on, and they blink 6 times rapidly at every 10 seconds.
• This problem is to be solved with A/S program.
Contact the dealer from who you bought
NetCam-2.
•
After being on for a second, Green and yellow LEDs blink 6 times rapidly. Then green
LED is on and yellow LED is off.
• This problem is to be solved by re-installing firmware. Visit Philips’
s Internet homepage
to download the firmware and install it on your NetCam-2.