User's Manual

2. Assigning IP address and Configuring administrator’ s condition with Setup program
1) Starting Setup Program for NetServer-6
Click the “NetServerSetup.exe” file
on your PC. When the Setup Program
is executed, the setup program detects
and shows every NetServer connected
on the local network.
From the NetServers listed, select one
to assign a new IP address. (Default is
211.53.133.92) To choose a
NetServer, click on its MAC Address
or IP addres
When a NetServer is selected, its IP
address will appear in the ‘ Selected IP
Address’ box. Type a password in the
“Admin’ s Password” box to change
the IP address, reboot NetServer, or
start configuration.
The default password is “admin”.