User's Manual Part 3
3–16 Compaq iPAQ Bluetooth Sleeve User Guide
Device Groups
transactions by any unbonded devices (see Figure 3-10).
Unbonded devices will be required to supply a matching
passkey.
■
Use the Default Passkey—Enabled only when you check
"Passkey is required." Check this box to allow the system to
use the default passkey assigned in the "General Tab."
■
Encryption is required—Enabled only when you check
"Passkey is required." Check this box to require data
encryption when transmitting data.
■
COM ports—Identifies the virtual COM ports that will be
associated with a Bluetooth serial port connection. The
Inbound COM port is used when other devices initiate a
serial connection to the iPAQ. The Outbound COM port is
used when you initiate a serial connection to other devices.