User's Manual

40
- During message playback, press to play
the message from the beginning.
- During the rst second of the current
message, press to play the previous
message.
Skip forward: Press •
to skip to the next
message.
Delete the current message: Press •
.
Note
No deleted messages can be recovered. •
From the handset
1 Press .
2 Select [ANSW. MACHINE] > [PLAY ],
then press [OK] to conrm.
New messages start playing. Old »
messages start playing if there is no
new message.
Press • [BACK] to stop the playback.
Press • [OK] to enter the options menu.
Press •
/ to increase/decrease the volume.
Delete an incoming message
From the base
1 Press during message playback.
The current message is deleted. »
From the handset
1 Press [OK] during message playback to
enter the options menu.
2 Select [DELETE], then press [OK] to
conrm.
The current message is deleted. »
Delete all old incoming messages
From the base
1 Press and hold in standby mode.
3 Select [ANSWER & REC.] or [ANSWER
ONLY], then press [OK] to conrm.
4 Select [DELETE], then press [OK] to
conrm.
The handset displays a conrmation »
request.
5 Press [OK] to conrm.
6 The pre-recorded outgoing message is
restored.
Note
No pre-recorded outgoing message can be •
deleted.
Incomingmessages(ICM)
Each message can be up to 3 minutes long.
When you receive new messages, the new
message indicator ashes on the answering
machine and the handset displays a notication
message.
Note
If you pick up the phone when the caller leaves •
a message, the recording stops and you can
talk to the caller directly.
Note
If the memory is full, the answering machine •
switches to [ANSWER ONLY] automatically.
Delete old messages to receive new ones.
Listen to the incoming messages
Incoming messages are played back in the
sequence they are recorded.
From the base
Start/Stop playback: Press • .
Adjust the volume: Press •
/ .
Skip backward: •
EN