User's Manual

41
Note
During call screening, use • and to adjust the
screening volume.
Tip
The handset automatically turns on the •
speaker for handset screening. To listen
through the earpiece, press
to turn off the
speaker.
Note
During ICM recording, any reset of the call •
screening status is forbidden.
Set the ring delay
You can set the number of times the phone
rings before the answering machine picks up
the call.
1 Press .
2 Select [ANSW. MACHINE] >
[SETTINGS] > [RING DELAY], then
press [OK] to conrm.
3 Select a new setting, then press [OK] to
conrm.
The setting is saved. »
Note
Ensure that the answering machine is switched •
on before this feature can be applied.
Tip
When you access the answering machine •
remotely, you are recommended to set the
ring delay to [ECONOMY] mode. This is a
cost effective way to manage your messages.
When there are new messages, the answering
machine picks up the call after 3 rings; When
there is no messages, it picks up the call after
5 rings.
All old messages are permanently »
deleted.
From the handset
1 Press on the handset.
2 Select [ANSW. MACHINE] > [DELETE
ALL], then press [OK] to conrm.
The handset displays a conrmation »
request.
3 Press [OK] to conrm.
All old messages are permanently »
deleted.
Note
You can delete the read messages only. No •
deleted messages can be recovered.
Call screening
You can hear the caller while he is leaving a
message. Then you can decide whether or not
to talk to the caller directly.
From the base
Press / to adjust the speaker volume
during call screening. The lowest volume level
turns off the call screening.
From the handset
1 Press on the handset.
2 Select [ANSW. MACHINE] >
[SETTINGS] > [HS SCREENING], then
press [OK] to conrm.
3 Select [ON]/[OFF]. Go to step 4 if you
select [ON] or step 5 if you select [OFF].
4 Select a handset to start the call
screening.
5 Press [OK] to conrm.
The setting is saved. »
English
EN