User's Manual

42
Note
When no message plays, the phone hangs up •
automatically if no key is pressed for 8 seconds.
Remote access commands
Key Function
1 Repeat current or play
previous message.
2 Play messages.
3 Skip to next message.
6 Delete current message.
7 Switch answering machine on
(not available during playback).
8 Stop message playback
9 Switch answering machine off
(not available during playback).
Set the sound quality of the message
You can adjust the sound quality of the
messages received from the answering
machine.
1 Press .
2 Select [ANSW. MACHINE] >
[SETTINGS] > [MSG QUALITY], then
press [OK] to conrm.
3 Select the new setting, then press [OK]
to conrm.
The settng is saved. »
Remote access
You can operate your answering machine
when you are away from home. Simply make
a call to your phone with a touch tone phone
and enter your 4-digit PIN code.
Note
The remote access PIN code is the same as •
your system PIN. The preset PIN is 0000.
Activate/deactivate the remote access
You can allow or block remote access to the
answering machine.
1 Press .
2 Select [ANSW. MACHINE] >
[SETTINGS] > [REMOTE ACCESS],
then press [OK] to conrm.
3 Select a new setting, then press [OK] to
conrm.
The setting is saved. »
Access the answering machine
remotely
1 Make a call to your home number with a
touch tone phone.
2 Press when the outgoing message starts
playing.
3 Enter your PIN code.
You now have access to your »
answering machine, and the new
messages start playing.
Note
You have 2 chances to enter the correct PIN •
code before your phone hangs up.
4 Press a key to carry out a function. See
the Remote access commands table
below for a list of available functions.
EN