User's Manual

19
Make a second call
Note
This service is network dependent. •
1 You can make a second call in these ways:
Press •
during a call; or
Press • [OK]. Select [START 2ND
CALL], then press [OK] again to
conrm.
The rst call is put on hold.•
2 Dial the second number.
The number displayed on the screen is »
dialed out.
Answer a second call
Note
This service is network dependent. •
When there is a periodical beep to notify you
of an incoming call, you can answer the call in
these ways:
1 Press and to answer the call.
The rst call is put on hold, and you »
are now connected to the second call.
2 Press and to end the current call
and answer the second call.
Toggle between two calls
You can toggle your calls in these ways:
1 Press and ; or
2 Press [OK] and select [SWITCH
CALLS], then press [OK] again to
conrm.
The current call is put on hold, and you »
are now connected to the other call.
Note
The caller ID service is network dependent. •
Tip
When there is a missed call, the handset •
displays a notication message.
Turn off the ringer for all incoming
calls
There are two ways to turn off the ringer:
1 Press and hold in standby mode.
»
displays on the screen.
2 When the phone rings, press .
Adjust the earpiece volume
Press or to adjust the volume during a call,
then press [OK] to conrm.
The earpiece volume is adjusted and »
the phone is back to the call screen.
Mute the microphone
1
Press during a call.
The handset displays » [MUTE ON].
The caller cannot hear you, but you »
can still hear his voice.
2 Press again to unmute the microphone.
You can now communicate with the »
caller.
Turn the speaker on or off
Press .
English
EN