headsets LED will flash red and blue alternately indicating that k has entered pairing mode. The headset will remain in pairing mode for three minutes, £3: Makes sirs the Bluetooth audio adapter is off. Press and hold the multi function button on the adapter until the LED flashes rad and blue transitively. “This indicates that the adapts has entered pairing mode, which will last for three minutes. Place the Bluetooth audio adapter and the headset next to sate other.
EN] Use your headset with your PC You ean usa a USB Bluetooth adapter to add Blusterous functionality to your PC and use your Phillips headset for VoIP chat, gaming or voids and music entertainment, Please refer to the USB adapters user guide for detailed instructions on setting up and using the headset with the PC. If prompted for & PIN code, please use (4 zeros). Control your music To adjust the volume of music use the VOL + and VOL key on your Bluetooth headset.
Wearing your headset = Use the included neck strap to wear the Philips Bluetooth stars headset around your neck. If you prefer using another headphone you can disconnect the neck strap at the twist-and-release clip and plug in your soles of headphone In the 3.5 mm headphone jack. The microphone is integrated in the pendant, so you will still be able to lead wireless communications with our headset. To personalize the fit of your headset choose ane of the 3 included ear bud caps that fit your ear best.
+ Tailor: Personalized fit and flexibility to use your own headphones « Switch stream: Switch between music and calls + Music control buttons Health and safety Using this headset with both ear buds Inserted may be illegal In some countries ‘while driving, For your safety avoid distractions from music or phone calls while in traffic or other potentially dangerous environments.
Bluetooth headset does | Battery is very low. Charge your Bucktooth not switch on. headset. No connection to mobile | Bluetooth disabled. Enable Bluetooth an your phone. movie phone and tum the headset on. Ma bite phone cannot find | Headset may not be in | Put your headset in pair headset pairing mode. (Pairing | ing mode as described. mode ghosts for 3 min} Pairings may have been | Start the pairing process reset or headset has been | as describe above. previously paired with other device.
Certificate , approvals, statesmen Federal Communication Com mi Interference Statement ‘This device complies with Part 15 of the FCC Rules, Operation is subject to the following two conditions: (1) this device my not cause harmful Interference, and (2) this device must accept any Interference received, Including Interference that may cause undesired ‘operation. This equipment has been tested and found to comply with the limits for a Chase B digital device, pursuant to Part 15 of the FCC Rules.