User's Manual

ManualsBrandsPHILIPS Consumer Electronics ManualsAudio EquipmentDECT phone with CID, speakerphone and TAM

32 Clock and Alarm settings

8 Clock and Alarm

settings

This feature allows you to set the

date, time and alarm settings for your

phone. The default date and time is

01-01

and

00:00

respectively.

8.1 Set date and time

Press

M in idle mode, scroll

: to

CLOCK & ALARM

and

press

, press

SELECT

to enter

SET

DATE/TIME

The last stored date is displayed.

Enter the current date (dd-mm)

and press

The last stored time is displayed.

Enter the current time (hh-mm).

Press

2 to select

(am) or

7 to select

(pm) if the time

is in 12 hours format. Press

to confirm.

• A validation tone is emitted.

Note

An error tone will be emitted if an

invalid digit is entered in the date/

time fields.

Hour: 00 to 12; Minute: 00 to 59

Date: 01 to 31; Month: 01 to 12

Warning

If your phone is connected to an ISDN

line through an adaptor, the date &

time may be updated after each call.

The availability of date & time update is

dependent on your network provider.

Please check the date & time settings

in your ISDN system or contact your

network provider.

8.2 Set date/time format

You can set your preferred date/time

format for your phone. The default

format is

DD/MM

and

24 HOURS

8.2.1 Set time format

Press

M in idle mode, scroll

: to

CLOCK & ALARM

and

press

, scroll : to

SET

FORMAT

and press

SELECT

Press

to enter

TIME

FORMAT

• The current setting is displayed.

Scroll

: to select time format

display (

12 HOURS

24 HOURS

)

and press

to confirm.

• A validation tone is emitted and

the screen returns to previous

menu.

8.2.2 Set date format

Press

M in idle mode, scroll

: to

CLOCK & ALARM

and

press

, scroll : to

SET

FORMAT

and press

SELECT

Scroll

: to enter

DATE

FORMAT

and press m

• The current setting is displayed.

Scroll

: to select date format

display (

) and

press

to confirm.

• A validation tone is emitted and

the screen returns to previous

menu.

ID555_IFU_US_EN.book Page 32 Thursday, June 26, 2008 4:43 PM

Summary of content (23 pages)

PAGE 1
ID555_IFU_US_EN.book 8 Page 32 Clock and Alarm settings This feature allows you to set the date, time and alarm settings for your phone. The default date and time is 01-01 and 00:00 respectively. Thursday, June 26, 2008 Please check the date & time settings in your ISDN system or contact your network provider. 8.2 Set date/time format You can set your preferred date/time format for your phone. The default format is DD/MM and 24 HOURS. 8.2.1 8.
PAGE 2
ID555_IFU_US_EN.book 8.3 Page 33 Thursday, June 26, 2008 4:43 PM Set alarm 1 Press M in idle mode, scroll : to CLOCK & ALARM and press mOK, scroll : to ALARM and press mSELECT. 2 Scroll : to OFF, ON ONCE or 3 ON DAILY and press mSELECT. If you select ON ONCE or ON DAILY, enter the time (hh-mm) for the alarm and press 2 to select A (am) or 7 to select P (pm) if the time is in 12 hours format. Press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu.
PAGE 3
ID555_IFU_US_EN.book 9 Page 34 Advanced settings 9.1 Easy Call When activated, the Easy Call feature enables you to dial a number by pressing any key on your handset. This feature is very useful for direct access to emergency services. You can enter up to 24 digits for easy call number. 2 3 4 9.1.2 1 2 34 To deactivate Easy Call mode Long press M (when Easy Call mode has been activated before). Scroll : to OFF and press mSELECT to confirm. 4:43 PM 9.1.3 1 2 3 9.1.
PAGE 4
ID555_IFU_US_EN.book Page 35 9.3 Call Barring Call barring enables you to restrict selected handsets from dialling a phone number beginning with certain digits. You can set up to 4 different barring numbers, with each number containing up to 4 digits. 9.3.1 To activate/deactivate Call Barring 1 Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to CALL BARRING and press mSELECT. 2 Enter the master PIN when prompted and press mOK to confirm. Note By default, the master PIN is 0000.
PAGE 5
ID555_IFU_US_EN.book Page 36 press mSELECT, scroll : to CHANGE PIN and press mSELECT. 2 Enter the current master PIN when prompted and press mOK to confirm. • The PIN entered will be shown as asterisks (*) on the screen. 3 Enter the new PIN and press mOK. 4 Enter the new PIN again and press mOK to confirm PIN change. • A validation tone is emitted and the screen returns to previous menu. Note If you forget your PIN, you will need to reset your phone to its default settings.
PAGE 6
ID555_IFU_US_EN.book Page 37 9.6 Unregister a handset 1 Press M in idle mode, scroll : to ADVANCED SET and press mSELECT, scroll : to UNREGISTER and press mSELECT. 2 Enter the master PIN when prompted and press mOK to confirm. Note By default, the master PIN is 0000. 3 Scroll : to select the handset number to unregister and press mSELECT. • A validation tone is emitted to indicate successful unregistration and the screen shows UNREGISTERED.
PAGE 7
ID555_IFU_US_EN.book Page 38 Answering Machine Answer Mode ANSWER & REC. 5 Number of rings before answer Outgoing Predefined for Messages ANSWER & REC. mode Handset OFF screening Base speaker LEVEL 5 Remote access DEACTIVATED 9.9 Set area code This feature is useful when you have subscribed to Caller Line Identification service. It allows you to set an area code in your ID555.
PAGE 8
ID555_IFU_US_EN.book Page 39 • The last stored detect string is displayed (if any). 3 Enter a detect string number (maximum 5 digits) and press mOK to confirm. 4 PREFIX is displayed on the screen. • The last stored prefix number is displayed (if any). 5 Enter the prefix number (maximum 14 digits) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu.
PAGE 9
ID555_IFU_US_EN.book 2 Page 40 Thursday, June 26, 2008 4:43 PM FIRST RING and press mSELECT. Scroll : to ON or OFF and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu.
PAGE 10
ID555_IFU_US_EN.book Page 41 Thursday, June 26, 2008 4:43 PM 10 Telephone answering machine (TAM) Your phone features an answering machine that records unanswered calls when it is activated. The answering machine can store up to 99 messages. The maximum recording time is 30 minutes (including all your personalised outgoing messages).
PAGE 11
ID555_IFU_US_EN.book V C Page 42 Thursday, June 26, 2008 4:43 PM Decrease (-) or increase (+) speaker volume during message playback Press to page the handset Press and hold for more than three seconds to start registration procedure 10.1.2 Playback of new messages via handset The last recorded message is played first via the loudspeaker. When all new messages have been played, the answering machine will stop and the icon stops blinking.
PAGE 12
ID555_IFU_US_EN.book Page 43 1 Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, press mSELECT again to enter PLAY menu. 2 Press mSELECT. 3 10.2 • The first recorded message will start to play until the last recorded message. During message playback, you can press m to select the available options (see options available under “Playback of new messages via handset” on page 42). Delete all messages Note Unread messages will not be deleted.
PAGE 13
ID555_IFU_US_EN.book Page 44 : to ANSWER MACHINE and press mSELECT, scroll : to RECORD OGM and press mSELECT. 2 Scroll : to ANSWER & REC. or ANSWER ONLY and press mSELECT. 3 Scroll : to RECORD OGM and press mSELECT. • The recording starts. 4 Press mSAVE to save your recording. • The recorded message will be played and the screen returns to previous menu once it has finished playing. To stop the playback, press mOK. Note The maximum length of an outgoing message is 2 minutes. Thursday, June 26, 2008 10.
PAGE 14
ID555_IFU_US_EN.book Page 45 You can set the answering machine to start playing your greeting message after 3 to 8 rings or ECONOMY. The default ring delay is 5. 1 Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to SETTINGS and press mSELECT, press mSELECT to enter RING DELAY. 2 Scroll : to your desired ring delay setting (3 to 8 rings or ECONOMY) and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu.
PAGE 15
ID555_IFU_US_EN.book 10.6.2.2 Page 46 Controlling the Answering Machine from an external call 1 From another phone, dial home. • The answering machine answers and starts playing your greeting message. 2 Within 8 seconds, press # key on the phone you use to dial and enter the remote access code (same as your master PIN code). • If the remote access code is incorrect, an error tone is emitted. Enter the access code again until you get the correct number.
PAGE 16
ID555_IFU_US_EN.book Page 47 1 Press M in idle mode, scroll : to ANSWER MACHINE and press mSELECT, scroll : to 2 SETTINGS and press mSELECT, scroll : to HS SCREENING and press mSELECT. Scroll : to ON or OFF and press mSELECT. Thursday, June 26, 2008 4:43 PM 2 Scroll : to your preferred language and press mSELECT to confirm. • A validation tone is emitted and the screen returns to previous menu. • A validation tone is emitted and the screen returns to previous menu. 10.7.
PAGE 17
ID555_IFU_US_EN.
PAGE 18
ID555_IFU_US_EN.book Page 49 Thursday, June 26, 2008 4:43 PM 12 Frequently asked questions www.philips.com/support In this chapter, you will find the most frequently asked questions and answers about your phone. Connection The handset does not switch on! • Charge the batteries: Put the handset on the base station to charge. After a few moments, the phone will switch on. The handset does not charge! • Check charger connections.
PAGE 19
ID555_IFU_US_EN.book Page 50 not displayed on the screen (see “Set the Ring Volume” in chapter 7.2.1). Caller cannot hear me at all! Microphone may be muted: During a call, press b. There’s no dialling tone! • No power: Check the connections. • Batteries are empty: Charge the batteries. • Move closer to the base station. • Wrong line cable used: Use the line cable provided. • Line adaptor is required: Connect the line adaptor to the line cord.
PAGE 20
ID555_IFU_US_EN.book Page 51 My handset keeps going into idle mode! • If there are no key presses for 30 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station. Phonebook entry cannot be stored and MEMORY FULL is displayed! • Delete an entry to free memory before saving your contact again.
PAGE 21
ID555_IFU_US_EN.
PAGE 22
ID555_IFU_US_EN.