ID555_IFU_US_EN.book Page 12 K Keypad lock/Format key * In idle mode: Insert *. Long press to lock/unlock the keypad. During a call: Insert *. In call log reviewing mode: Press repeatedly to view the alternate dialing sequences. L Mute key [ During a call: Mute/Unmute the handset microphone. M Call transfer key & Intercom/ Conference key c In idle mode: Initiate an internal call. During a call: Hold the line and page another handset. Long press to start a conference between internal and external calls.
ID555_IFU_US_EN.book 3.3 Page 13 Thursday, June 26, 2008 4:43 PM Display icons Indicates that the battery is fully charged. Icon blinks during charge and when the battery is low. Indicates that the battery is fully discharged. Indicates that an external call is connected or held. Icon blinks when receiving an incoming call. Indicates new voice messages are received. Icon blinks when there are unread messages. Displays when there are existing call log records or when call log is accessed.
ID555_IFU_US_EN.book 3.4 A Page 14 4:43 PM Overview of the base station Message Counter Blinking: Indicates number of new messages. Steady: Indicates number of old messages. 2 bars flashing: Indicates that there is no more memory left. Indicates the volume level (L0 - L5) when V is pressed. Indicates the current message number during playback. B On/Off key o In idle mode, short press to switch on/ off the answering machine. C Volume keys V Increase/Decrease speaker volume during message playback.
ID555_IFU_US_EN.book Page 15 4 Getting started 4.1 Connect the base station 1 Place the base station in a central 2 location near the telephone line socket and electricity socket. Connect the line cord and the power cable to their corresponding connectors at the bottom of the base station as shown. 3 Connect the other end of the line cord to the telephone line socket and the other end of the power cable to the electricity socket.
ID555_IFU_US_EN.book Page 16 4.2.1 Install battery ! Warning Always use Li-ion rechargeable battery supplied with your unit. There could be risk of battery leakage if you use other battery types. 1 Slide out the battery cover. 2 Place the batteries and replace the cover. Thursday, June 26, 2008 4:43 PM 1 Place the handset on the charging cradle of the base station. A melody is emitted if the handset is placed correctly. on the 2 The battery icon display blinks during charge.
ID555_IFU_US_EN.book Page 17 Thursday, June 26, 2008 4:43 PM 4.3 Menu structure The table below describes the menu tree of your phone. Press M in idle mode to enter the main menu. Use navigation keys : to navigate within the menus and press left softkey m to enter each option. PHONEBOOK NEW ENTRY LIST EDIT ENTRY SELECT MELODY DELETE ENTRY DELETE ALL DIRECT MEMORY KEY 1 ...
ID555_IFU_US_EN.
ID555_IFU_US_EN.book ANSWER MACHINE Page 19 PLAY Thursday, June 26, 2008 During playback 4:43 PM REPEAT/PREVIOUS/NEXT/ DELETE DELETE ALL ANSWER ON/OFF RECORD OGM ANSWER & REC. ANSWER ONLY ANSWER MODE PLAY/RECORD OGM/ DELETE PLAY/RECORD OGM/ DELETE ANSWER & REC.
ID555_IFU_US_EN.book Page 20 5 Using your phone 5.1 Make a call Thursday, June 26, 2008 5.1.4 4:43 PM Call from the call log 1 Press u in idle mode. 2 Scroll : to CALL LIST or ANSWER MACHINE and press mSELECT to enter the respective sub-menus. 5.1.1 Predialling 1 Dial the number (maximum 24 digits). 2 Press r or v key. • The call is initiated. Tip You may insert a prefix number to the beginning of your predial number, see “Set area code” on page 38 for more information. 5.1.
ID555_IFU_US_EN.book Page 21 • Press * 4 times to display “1-234-567-8900” again. 2 To dial the current displayed number, press * key. • The call is initiated. Note You need to subscribe to Caller Line Identification service to be able to see the caller’s number or name in the call log (see “Access Call log” on chapter 6.9.1). When saving the call list entry to phonebook, the original incoming number will be saved instead of the current displayed number.
ID555_IFU_US_EN.book 6 Page 22 Use more of your phone 6.1 Switch the handset on/off Press and hold e key for 3 seconds to switch on/off the handset in idle mode. 6.2 Keypad lock/unlock Press and hold * key for 2 seconds to lock/unlock the keypad in idle mode. 6.3 Text or number entry When you select a field in which you can enter text, you can enter the letters that are printed on the keys by pressing the relevant key once or several times.
ID555_IFU_US_EN.book 6.4.3 Page 23 Activate/Deactivate loudspeaker mode Danger Handsfree activation can suddenly increase the volume in the earpiece to a very high level. Make sure the handset is not too close to your ear. 1 During a call, press v key to activate the loudspeaker mode. 2 Press v key again to return to normal mode. 6.4.4 Adjust loudspeaker volume During a call in handsfree mode, press : to select from VOLUME 1 to VOLUME 5. 6.4.
ID555_IFU_US_EN.book Page 24 your network provider for more information on this service. 6.7 Using your Phonebook Your phone can store up to 200 phonebook memories, including 10 direct access memories (1 to 9). Depending on your country, Key 1 and Key 2 may be preset to the voice mail number and information service number of your network operator respectively. Each phonebook entry can have a maximum of 24 digits for the phone number and 14 characters for name. 6.7.
ID555_IFU_US_EN.book Page 25 6.7.4 Set melody With this function you can personalize the melody played when someone in the phonebook calls you. Note You need to subscribe to Caller Line Identification service to be able to benefit from this feature. 1 Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to SELECT MELODY and press mSELECT. 2 Scroll : to select an entry you wish to set the melody for and press mSELECT. 3 Press mEDIT to set or change the melody for the contact.
ID555_IFU_US_EN.book Page 26 5 Scroll : to the entry you wish 6 to store as direct access memory and press mSELECT to view the details. Press mSELECT to confirm. • A validation tone is emitted. 6.7.7.2 1 2 3 4 Delete Direct Access Memory Press M in idle mode, press mSELECT to enter PHONEBOOK, scroll : to DIRECT MEMORY and press mSELECT. Scroll : to select a key (Keys 1 to 9) and press mSELECT. • The stored number is displayed (if any). Press mSELECT to display the menu options.
ID555_IFU_US_EN.book Page 27 3 DELETE ALL? is displayed on the screen. Press mOK again to confirm deletion. • A validation tone is emitted. 6.9 Using the Call log The call log offers quick access to the CALL LIST and ANSWER MACHINE events. If you have subscribed to Caller Line Identification service, the identity of the caller (caller’s number or name) will be displayed together with the date and time of the call*. The CALL LIST records the last 50 entries of the incoming calls.
ID555_IFU_US_EN.book Page 28 6.10 Using the Intercom ! Warning Intercom and call transfer is only possible with handsets registered to the same base station. This feature is only available when there are at least 2 registered handsets. It allows you to make free internal calls, transfer external calls from one handset to another and use the conference option. 6.10.1 Intercom another handset Note If the handset does not belong to ID555 range, this function may not be available. 1 Press c key in idle mode.
ID555_IFU_US_EN.book Page 29 Tip To put the internal call on hold and answer the incoming external call, press r key. 6.10.4 Switch between an internal and external call To switch between an internal or external call, press c key. 6.10.5 Establish a three-party conference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
ID555_IFU_US_EN.book 7 Page 30 Personal settings 7.1 Change the Handset Name You can name the handset and display the handset name in idle mode. The default handset name of your handset is PHILIPS. 1 Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, press mSELECT to enter HANDSET NAME. 2 Edit the handset name (maximum 12 characters) and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 7.2 7.2.
ID555_IFU_US_EN.book 2 Page 31 press mSELECT, scroll : to HANDSET TONES and press mSELECT. Scroll : to KEY BEEP and press mSELECT. Scroll : to ON or OFF and press mOK to confirm. • A validation tone is emitted and the screen returns to previous menu. 7.3 Change the Display Language Your handset can support different display languages. 1 Press M in idle mode, scroll : to PERSONAL SET and press mSELECT, scroll : to LANGUAGE and press mSELECT.
