User's Manual

50
Using the Call log
at the top of the list. L1 or L2
indicates the line on which the
call was received. If the call is
unviewed and unanswered, New
appears on the display. After you
view the message, New
disappears.
• Press t to dial out the number
of the selected call log entry.
2 To view the call details, press o
Menu and then press o Select.
The display shows the caller
information.
• Press c Back at any time to
return to the previous menu.
11.1.1 To choose the format for call
log display
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will
automatically appear in front of the 10-
digit local calls.
1 When viewing the call log, press *
to change the format of the call log
display as it should be dialed from
your location. For example, if the
call log entry appears as “234-567-
8900”:
• Press * once to display “1-234-
567-8900”
• Press * twice to display “567-
8900”
• Press * 3 times to display “1-
567-8900”
•Press * 4 times to display
“234-567-8900” again.
2 To dial the current displayed
number, press t (or l on the
base station).
• The call is initiated.
You need to subscribe to Caller Line
Identification service to be able to see
the caller’s number or name in the call
log (see section 11.1 - “Access the Call
log”).
When you store an incoming number in
the phonebook, the digits of the number
will be saved exactly as they appear on
the screen.
If the first 3 digits of the incoming
number corresponds to the local area
code set in your phone, they will be
filtered automatically when you press the
t or l on the handset (or l on
the base station) to dial. To change the
local area code, see section 13.9 - “Set
Area Code.”
11.2 Save call list entry into the
phonebook
1 Press u in idle mode, then scroll
n to select an entry and press o
Menu.
2 Scroll n to Save Number and
press o Select.
3 Enter Name is displayed on the
screen. Enter the name of the
contact (maximum 14 characters)
and press o OK.
4 Enter Number is displayed and
the selected number from the call
Note