User's Manual

55
Advanced settings
same state, line 1 takes priority.) If Auto
Conference is activated, pressing l
lets the base station join a conversation
between the external call on line 1 and
another unit.
If Line 1 or Line 2 is selected as default
and the corresponding line is free,
pressing l automatically connects to
that line when making outgoing calls, or
when receiving an incoming call on that
line. If Auto Conferenece is activated,
pressing l lets the base station join a
conversation on the selected line
between an external caller and another
unit.
1 Press m in idle mode, scroll u/
d to Personal Set and press
Select soft key.
2 Scroll u/d to Line Setting
and press Select soft key.
3 Scroll u/d to select Auto,
Line 1, or Line 2 and press Select
soft key.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
13 Advanced settings
These settings can be made from any
registered SE659 handset. They cannot
be made from the base station.
13.1 Easy Call
When activated, this feature allows you
to dial a preset number by pressing any
key on the handset (except c
Cancel). This feature is useful for fast
access to emergency services.
13.1.1 Set Easy Call to On or Off
Follow this procedure to switch Easy Call
on. To switch Easy Call off, see the Note
at the end of this section.
1 Press m in idle mode, scroll n to
Advanced Set and press o
Select.
2 Easy Call is highlighted. Press o
Select to enter the Easy Call menu.
3 Mode is highlighted in the display.
Press o Select again to select
Mode, then scroll n to On.
4 Press o Select to confirm the
selection.
• If an Easy Call number has not
been set, you will be prompted
to input the Easy Call number.
• If an Easy call number has already
been set, the screen returns to
idle mode. If you want to edit the
number, press c Cancel and
scroll to Number and press o
Select, edit the new number and
press o OK.
When you switch Easy Call on, Easy
Call On will be displayed on your screen
in standby mode. You can still answer any
incoming call as normal.
To switch Easy Call off from idle mode,
press c Cancel. Mode is highlighted
Note