User's Manual

50
Telephone answering machine (TAM)
old messages in the same format
(however ‘New’ is not displayed.)
and plays the old messages.
12.1.2 Functions available during
playback
During playback, you can enable the
following functions by pressing o
Option. Use n to scroll between the
functions and press o OK to confirm.
12.2 Delete all messages
Deleted messages cannot be recovered.
Unplayed messages will not be deleted.
1 Press the m key in idle mode,
scroll n to Answer Machine, and
press o Select.
2 Scroll n to Delete All and press
o Select.
3 Delete All? is displayed on the
screen. Press o OK to confirm
deletion of all your messages.
• Waiting… is displayed while the
messages are deleted; then,
Deleted is displayed for 2
seconds, and the display returns
to the Answer Machine menu.
12.3 Turn the Answering Machine
On/Off
You can turn the answering machine on
or off from the handset as follows.
1 Press the m key in idle mode,
scroll n to Answer Machine, and
press o Select.
2 Scroll n to Answer On/Off and
press o Select.
3 Scroll n to select On or Off and
press o Select.
• A validation tone is emitted and
the screen returns to previous
menu.
12.4 Play, Record, or Delete an
Outgoing Message
You can record a personalized message
to be played when the answering
machine picks up an incoming call.
The maximum length of an outgoing
message is 1 minute.
1 Press the m key in idle mode,
scroll n to Answer Machine, and
press o Select.
2 Scroll n to Record OGM and
press o Select.
3 Scroll n to select Answer & Rec.
or Answer Only and press o
Select.
4 Scroll n to select Play, Record
Message, or Delete and press o
Select.
• If Play is selected, the current
outgoing message is played.
• If Record Message is selected,
a beep sounds and the handset
Repeat Replay the current
message
Next Listen to the next
message.
Previous Listen to the previous
message.
Delete Delete the message
currently playing.
Warning
Note
Note
01GB01COV.book Page 50 Wednesday, January 16, 2008 1:30 PM