User's Manual

27
Using your phone
7 Using your phone
7.1 Make a call
7.1.1 Predialling
1 Enter the number. (A maximum of
24 digits including * and # are
allowed. Press c Clear to delete
the last digit.) Or long press to
delete all.
2 Press t.
• The call is initiated.
7.1.2 Direct dialling
1 Pick up the handset and press t.
(Or press l to start a call in
speaker mode.)
2 Dial the number.
• The call is initiated.
7.1.3 Call from redial list
1 Press r in idle mode.
2 Scroll n to an entry in the redial
list.
3 Press t.
• The call is initiated.
You can also press t first and then
press c Redial to enter the redial list.
Then scroll n to select a number in the
list and press o Select. The number is
dialed automatically.
7.1.4 Call from the call log
You need to subscribe to Caller Line
Identification service to be able to see
the caller's number or name in the call
log. See section 8.8.1 - “Access the Call
log”.
1 Press u in idle mode.
2 Press o Select to select Call
List.
If the list is already empty, then “List
Empty” is displayed.
3 Scroll n to an entry in the call list.
4 Press t.
• The call is initiated.
7.1.4.1 To choose the format for
call log display
You must choose the correct format to
dial the area code and number of the call
log record chosen. The original incoming
number from the call log will appear as a
7, 10 or 11-digit number. If it is a long
distance call, the prefix digit 1 will
automatically appear in front of the 10-
digit local calls.
1 When viewing the call log, press *
to change the format of the call log
display as it should be dialed from
your location. For example, if the
call log entry appears as “234-567-
8900”:
•Press * once to display “1-234-
567-8900”
•Press * twice to display “567-
8900”
Note
Note
Note
01GB01COV.book Page 27 Wednesday, January 16, 2008 1:30 PM