User's Manual

Viewing Network Status Settings

For troubleshooting purposes, you can view various network status settings, as listed

under the ‘List of Network Status Settings’.

Use the remote control and follow these steps to display network status settings:

1 Press SETTINGS (X) to display the Settings menu.

2 Press 4 until ‘Device Status’ is highlighted. Press 2.

3 To browse through the Network Status Settings, press 3/4.

Note: To change Device Status Settings, see ‘Managing Network Profiles Using the

Remote Control’.

List of Network Status Settings

Setting Explanation

Device Name Name of the SLA5520 device.

Example: My SLA5520

Software Version Version of the SLA5520 software in use.

Bootloader version Version of the SLA5520 bootloader

software in use.

Hardware version Version of the SLA5520 hardware in use.

Netwerk name (SSID) SSID (Service Set Identifier) for the

wireless network.

Network Type Wireless network type: Infrastructure if

the network uses an Internet Base

station; Ad-hoc if the network uses a

peer-to-peer connection and no Internet

base station.

Security (Encryption) Indicates whether encryption is enabled

on the wireless network: ‘None’, ‘WPA’

or ‘WEP’.

Wireless Signal Strength Wireless network signal strength.

Wireless Channel Wireless channel currently used by the

SLA5520.

Unique product ID (MAC) Physical MAC address of the SLA5520.

Automatic adress (DHCP) Dynamic IP address currently allocated

to the SLA5520 by a DHCP server

(if DHCP in use).

Software address (IP) Static IP address currently allocated to

the SLA5520 (if DHCP not in use).

SLA5520_Eng*.qxd 02-06-2005 16:44 Pagina 31