Always there to help you Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Wireless Microphone and Bluetooth Docking Speaker Introduction What's in the box Overview of the unit 3 Get started Connect power Swith on the Bluetooth docking speaker Install/replace microphone batteries 4 Play Sing along through the wireless microphone Play from a Bluetooth enabled device Play and charge your iPad through the dock connector directly Play from an external device 2 2 3 6 6 6 6 8 8 8 8 10 10 11 12 13 5 Product information Specifications 14
1 Important Safety This 'bolt of lightning' indicates uninsulated material within the device may cause an electrical shock. For the safety of everyone in your household, please do not remove the covering. The 'exclamation mark' calls attention to features for which you should read the enclosed literature closely to prevent operating and maintenance problems.
n Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
any other antenna or transmitter. Installers must ensure that 20cm separation distance will be maintained between the device (excluding its handset) and users. FCC rules This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Note • The type plate is located on the back of the unit.
2 Your Wireless Microphone and Bluetooth Docking Speaker • • • • • • Wireless microphone Bluetooth docking speaker AC power cord 3 X AAA batteries Quick start guide Safety sheet Overview of the unit Wireless microphone Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus.
b a c de h a • gf Turn the unit on/off. b Power/Bluetooth indicator • Indicate the power/Bluetooth status. c -/+ • Adjust volume. d • • (Press) pair with a Bluetooth enabled device that supports A2DP (Advanced Audio Distribution Profile). (Press and hold) pair with the wireless microphone in case automatic pairing fails. e Dock for iPad f SOFTWARE UPGRADE (for engineering use only) g AUDIO-IN • Connect an external audio player through a 3.5mm audio input cable (not supplied).
3 Get started Always follow the instructions in this chapter in sequence. • To switch the unit on from standby mode, press again. Tip • If the speaker stays idle for more than 15 minutes, it switches to standby mode automatically. Connect power Caution • Risk of product damage! Make sure that the power • • supply voltage corresponds to the voltage printed on the back of the unit. Risk of electric shock! When you unplug the AC power cord, always pull the plug from the socket. Never pull the cord.
3 Push back the battery cartridge, then close the battery compartment. Note • If you are not going to use the microphone for a long time, remove the batteries. • New batteries installed in the microphone support up to 30 hours of continuous use. • When the power indicator flashes red, it indicates that the power level is low and you need to replace the batteries.
4 Play Sing along through the wireless microphone Note • The effective operation range between the wireless • • 1 microphone and Bluetooth docking speaker is approximately 10 meters (30 feet). If the Bluetooth docking speaker is already paired and connected with another Bluetooth enabled device, press on the top panel of the speaker to remove the existing Bluetooth connection. Before you dock your iPad onto the Bluetooth docking speaker, you can use the supplied bumper for better support if necessary.
Play from a Bluetooth enabled device Note • The effective operation range between the Bluetooth • • • 6 7 Select a song from StarMaker Karaoke + Auto-Tune® and sing along through the wireless microphone. 1 docking speaker and your Bluetooth enabled device is approximately 10 meters (30 feet). To pair with a Bluetooth enabled mobile device, make sure that: no iPad is docked; or you have stopped music play on your docked iPad and the StarMaker Karaoke + Auto-Tune® app is not running.
Play and charge your iPad through the dock connector directly Compatible iPad 3 4 This unit supports play and charge of the following iPad models: • New iPad • iPad 2 • iPad Select 'PHILIPS_AEA7100/17' on your Bluetooth enabled device (if necessary, input '0000' as the paring password). » After successful pairing and connection, the Bluetooth indicator on the speaker turns solid blue and the speaker beeps twice. Load the iPad • To remove the iPad • Pull the iPad out of the dock.
Play from an external device You can also listen to an external audio player through the Bluetooth docking speaker. AUDIO-IN 1 2 3 Connect a 3.5mm audio cable to: • the AUDIO-IN socket on the back of the Bluetooth docking speaker. • the headphone socket on an external audio player. Start music play on the external audio player. Use -/+ on the top of the Bluetooth docking speaker to adjust volume.
5 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Signal to Noise Ratio Aux-in Link 2W RMS >70dB 600 mV RMS, 10 kohm Speakers Speaker Impedance Speaker Driver Sensitivity 4 ohm 70mm full range > 84dB/1m/1W Bluetooth Bluetooth specification Supported Profiles Advanced features Range V2.1 AD2P V1.
6 Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
Specifications are subject to change without notice © 2012 Koninklijke Philips Electronics N.V. All rights reserved.
