Always there to help you Register your product and get support at www.philips.
Contents 1 Important Important Safety Instructions Notice 2 2 2 2 Your WeCall speaker 5 5 5 6 3 Get started 7 7 7 7 4 Use the WeCall speaker 9 9 Introduction What's in the box Product overview Charge the WeCall speaker Turn on the WeCall speaker Connect the WeCall speaker Use as a speaker phone Use together with the WeCall app (for iPhone or Android phone) Use as a Bluetooth or PC speaker 9 10 5 Product information 12 6 Troubleshooting 13 EN 1
1 Important Important Safety Instructions The translation of this document is for reference only. In the event of any inconsistency between the English version and the translated version, the English version shall prevail. • Follow all instructions. • Heed all warnings. • Do not use this device near water. • Clean only with dry cloth. • Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
This device complies with Industry Canada licence-exempt RSS standard(s) and Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. (French) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence et la partie 15 des Règles FCC.
Please inform yourself about the local rules on separate collection of batteries. The correct disposal of batteries helps prevent potentially negative consequences on the environment and human health. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Always bring your product to a professional to remove the built-in battery. Skype, Skype Communications S.a.r.l. or any of their related companies.
2 Your WeCall speaker To fully benefit from the support that Philips offers, register your product at www.philips. com/welcome. Introduction This Bluetooth conference speaker (WeCall speaker) allows you to: • connect to a Bluetooth enabled smartphone and make a mobile or VoIP call through the WeCall speaker directly. • connect to a PC/Mac through the supplied USB cable and make a VoIP call through the WeCall speaker directly.
Product overview a i h g b f c e d a • / Adjust volume during a call or music play. b ON/OFF power switch • Turn on or off the WeCall speaker. c CLEAR • Remove the existing pairing information. d Charge indicator • Turns red when the battery is running low, or when you charge the WeCall Speaker. e Micro USB socket • Connect the supplied USB cable. f USB/ 6 EN source switch g • Switch between the USB and Bluetooth audio source. • • Answer an incoming mobile call. End an ongoing mobile call.
3 Get started Caution Turn on the WeCall speaker • •• Use of controls or adjustments or performance of Slide the power switch to the ON position. »» In Bluetooth mode, the status indicator turns blue. »» In USB mode, the source indicator turns green. procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence.
2 3 Enable Bluetooth on your Bluetoothenabled device. Select 'Philips WeCall speaker' on your Bluetooth-enabled device and if necessary input '0000' as the paring password. »» The source indicator starts to flash blue. »» After successful pairing and connection, the source indicator turns solid blue and the WeCall speaker beeps. Note •• To pair with a new Bluetooth-enabled device, you can: •• 1.
4 Use the WeCall speaker Use as a speaker phone If the WeCall speaker has been connected to a Bluetooth-enabled mobile phone or other devices such as a tablet or PC/Mac: 1 2 3 Make sure that you have selected the USB source on the WeCall speaker. Make a VoIP call (such as Skype) on your PC/Mac. Use the WeCall speaker as a speaker phone during the call. Use together with the WeCall app (for iPhone or Android phone) 1 2 3 Make sure that you have selected the Bluetooth source on the WeCall speaker.
3 Run Philips WeCall and import meetings from your calendar. • The potential conference calls will be highlighted. Choose one of them. Tip •• During a call, you can use / on the WeCall speaker to adjust volume. •• During a call, you can press to mute the WeCall speaker so that the caller cannot hear you. •• During a call, you can press to end the call. Use as a Bluetooth or PC speaker 4 Confirm a telephone number and code. 1 2 5 Make a conference call.
Tip •• During audio play, you can use speaker to adjust volume. •• During audio play, you can press WeCall speaker.
5 Product information Amplifier Rated Output Power Frequency Response 2W RMS 80Hz -16k Hz, ±3dB >75dB Signal to Noise Ratio Bluetooth Bluetooth® version Frequency band Range V2.1 + EDR 2.402-2.480 GHz ISM Band 10m (free space) Speakers Speaker Impedance Speaker Driver Sensitivity 4ohm 1" speaker >84dB/1W/1m General Information DC Power Input Battery Dimensions - Main Unit (w x h x d) Weight - With Packing - Main Unit 12 EN Input: 5 VDC, 1 A Model No.
6 Troubleshooting Warning •• •• •• Never remove the casing of this device. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this device, check the following points before requesting service. If the problem remains unsolved, go to the Philips Web page (www. philips.com/support). When you contact Philips, make sure that the device is nearby and the model number and serial number are available.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved.