User's Manual
English
17
Basic playback controls
To play a disc
● Press ÉÅ to start playback.
➜ The current track number and elapsed
playing time of the track are displayed during
disc playback.
To select a different track
● Press S/T (or ¡ / ™ on the remote
control) once or repeatedly until the desired
track number appears in the display.
● You can also use the Numerical Keypad
(0~9) on the remote to select a track directly.
● If you have selected a track number shortly after
loading a disc or in the PAUSE position, you will
need to press ÉÅ to start playback.
Te xt display during playback
In CD mode
● Press DISPLAY repeatedly to see the
following information.
➜ Tr ack number and elapsed playback time of
current track.
➜ Tr ack number and total elapsed playback
time.
➜ Tr ack number and remaining playback time
of current track.
➜ Tr ack number and total remaining playback
time.
In MP3/WMA/USB/CARD mode
● Press DISPLAY repeaedly to see the following
information:
➜ Tr ack number and elapsed playback time of
current track
➜ Title name
➜ Album name
➜ ID3 (if available)
Loading a disc
This CD player plays Audio Discs including CD
Recordables, CD-Rewritables, MP3 CD and
WMA disc.
● CD-ROM, CD-I, CDV, VCD, DVD or computer
CDs, however, are not possible.
1 Press SOURCE on the top of the system to
select CD or press CD on the remote.
2 Insert a disc into the disc loader..
➜ Make sure the label side is facing up.
➜ Make sure you have removed any other disc
from the slot loader.
3 Press ÉÅ to start playback.
4 At any time, simply press 9 to stop playback.
CD/MP3-CD/WMA Operation
pg001-034_BTM630_37-Eng 2007.6.14, 17:1517