User's Manual
Table Of Contents
- Contents
- Introduction
- General description (Fig. 1)
- Intended use
- IMPORTANT SAFEGUARDS
- Using the body analysis scale
- Preparing for use
- Measuring weight and body fat
- Performing a measurement
- Cleaning and storage
- Accessories
- Disposal
- Assistance
- Full Two-Year Warranty
- Troubleshooting
- Specifications
- Electromagnetic emissions and immunity
- EMC Guidance
- Table 1 Guidance and manufacturer's declaration – electromagnetic emissions - for all ME equipment and ME systems
- Table 2 Guidance and manufacturer's declaration – electromagnetic immunity – for all ME equipment and ME systems
- Table 4 Guidance and manufacturer's declaration – electromagnetic immunity –for ME equipment and ME systems that are not life supporting
- Table 6 Recommended separation distances between portable and mobile RF communications equipment and the ME equipment or ME system – for ME equipment and ME systems that are not life supporting
- FCC Compliance information
-
To select the correct user profile, step off the device and tap on the
measurement platform to confirm the correct user profile.
-
All profiles will be shown alternately on the display. Tap on the scale
to confirm your user profile.
-
Make sure that you select the correct user.
Factory reset
To add up to 8 new user profiles or delete all measurement results from the
device, you can perform a factory reset. With the factory reset the device is
cleared from all existing user profiles and measurement results.
1 With the device turned on, press and hold the measurement unit button
located on the bottom of the device for 20 seconds, until "FACt" is shown
on the display. Now all data is deleted.
-
After resetting the scale will automatically turn off.
-
You can now create new users profiles (see 'Pairing the body analysis
scale to your mobile device and create a user profile').
Cleaning and storage
Caution: Never immerse the device in water and do not rinse it under
the tap.
1 Wipe the surface of the device with a cloth.
-
Use a dry cloth to wipe dust off the surface of the device.
-
Use a slightly damp cloth to wipe dirt off the surface of the device. Dry
the surface with a dry cloth after cleaning.
Caution: Do not use propellant, abrasive or other chemicals to clean
the device in order to avoid discoloration or malfunction of the scale.
2 Store the device in a dry, dust-free place away from direct sunlight or
other heat sources. Avoid surroundings with fluctuating temperatures
(see Specifications').
Caution: Do not drop the device.
This device has no other user-serviceable parts. For assistance call
1-844-531-6861.
Accessories
Philips accessories may be purchased at a store near you, or on our website
www.philips.com/store.
Disposal
This product contains batteries:
17
English