Register your product and get support at www.philips.
Contents 1 Important Safety Notice 2 Your Entertainment System Introduction What’s in the box What else you need Overview of the main unit Overview of the remote control 3 4 Prepare 4 4 5 8 8 8 8 8 9 Connect 10 10 Set up a Wi-Fi network for AirPlay 12 Connect the unit to a Wi-Fi network (router) 12 Connect an AirPlay device to the same Wi-Fi network 17 5 Play 19 Stream audio from your AirPlay device 19 Control play 20 Advanced control 20 Update firmware 20 Play from an external device 21 Play
1 Important Safety Important Safety Instructions a Read these instructions. k Only use attachments/accessories specified by the manufacturer. l Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. b Keep these instructions. c Heed all warnings. d Follow all instructions. e Do not use this apparatus near water. f Clean only with dry cloth.
may be regulated due to environmental considerations. For disposal or recycling information, please contact your local authorities or the Electronic Industries Alliance: www.eiae.org. r Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. Warning • Never remove the casing of this apparatus. • Never lubricate any part of this apparatus. • Never place this apparatus on other electrical equipment.
Notice Notice of compliance Modifications The user is cautioned that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC & RSS compliance statement This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s).
Disposal of your old product and batteries Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health.
• • • • 2 Your Entertainment System 1 x MP3 link cable Desk top adaptor User manual Quick start guide What else you need Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No.
f WI-FI SETUP • Connect the unit to a Wi-Fi network. h • Start or pause play. Overview of the remote control a b h g f c e d a Turn on/off the unit. • b +/• Adjust volume. c • Select the AirPlay device audio source. • Mute or restore volume. • Select the AUX IN audio source. d e f USB • USB socket. g / • Skip to the previous/next track.
» After boot-up, the indicator starts to blink in green slowly. 3 Prepare Always follow the instructions in this chapter in sequence. Connect Connect power Caution • Risk of product damage! Ensure that the power supply • • 1 voltage corresponds to the voltage printed on the bottom of the unit. Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Before connecting the AC adaptor, ensure you have completed all other connections.
Note • Before pressing any function button on the remote • control, first select the correct source with the remote control instead of the main unit. If you are not going to use the remote control for a long time, remove the battery.
4 Set up a WiFi network for AirPlay Note 3 Check the type of the wireless router you use. Connect the unit to a Wi-Fi network (router) Select a scenario below that matches your router type. • Some operations may vary as you use different types of wireless routers. Note • You are recommended to change the SSID of your wireless router to ‘PhilipsFidelioAP’. In this way, the unit can get connected to the router automatically after power-on. You can hear a beep after successful connection.
WPS Tip • To change the name of the unit for AirPlay, proceed • with steps 2 to 7 in ‘Scenario 2: Connect to a non-WPS router’ below. For some wireless routers, you may need to hold the WPS button for WPS connection. See the user manuals of the specific routers for details. 3 Scenario 2: Connect to a non-WPS router Select Philips_Fidelio_AirPlay from the list of available networks. You can connect the unit to a non-WPS router through • an iOS 4.
Philips_Fidelio_Airplay 169.254.1.1 4 Wait until successful Wi-Fi connection to the main unit. » A Wi-Fi signal icon is displayed on the iPod touch/iPhone/iPad. 5 Open Safari on your iPod/iPhone/iPad. • Or open the web browser on your PC or Mac. 6 Type in 169.254.1.1 at the address bar to enter the DS8800W configuration page. 14 EN 7 Select the Network Configuration tab.
Network Configuration 8 9 Change the name of the unit in Airplay Device Name if you like. Select your router SSID from the pulldown list of Service Set ID (SSID). 10 Enter your network key if required (For some routers, you may also need to tick DHCP under Advance Setting.
12 Click OK on the popup menu to confirm 11 Click Apply at the bottom of the page to apply your settings. » A menu for confirmation of your set parameters pops up. 16 EN your settings. » After a while, the indicator stops blinking and stays green, and the speaker beeps. » The unit joins the Wi-Fi network successfully.
Connect an AirPlay device to the same Wi-Fi network 2 Select your router SSID from the list of available wireless networks. To work together with the unit, your AirPlay device is required to join the same Wi-Fi network as the unit. 1 Select Settings -> Wi-Fi on your iPod touch/iPhone/iPad. • Or enter the list of available wireless networks on your PC/Mac.
3 Wait until successful Wi-Fi connection to the router. » A Wi-Fi signal icon is displayed on the AirPlay device.
5 Play Stream audio from your AirPlay device Note • Make sure that the AirPlay device is connected to the same Wi-Fi network as the unit. Stream from your iOS 4.2 (or later) enabled iPod touch/iPhone/iPad 1 2 3 Open iPod. 4 Select a media file and start play. 5 Wait until successful audio streaming to the speakers. Tap on the AirPlay icon. Select Philips_Fidelio XXXX (or user customized name) from the list.
Stream from your Wi-Fi enabled PC or Mac installed with iTunes 10 (or later) Note Advanced control For advanced control, you can use your AirPlay device to download the Philips Fidelioapplication from Apple Application Store. • Before you open iTunes, make sure that you have enabled Bonjour service in your PC.
the router configuration page) at the address bar. » The DS8800W configuration page is displayed. 4 Select the Firmware Update tab, and then follow the on-screen instruction to enter the next page. 5 Click Browse to select the downloaded firmware update file, and then click Open. 6 Click Upload to upload the file, and then compare the current and new file versions. 7 After you make sure that the downloaded update file is the latest, click Ok to start firmware update. » A progress bar is displayed.
2 Press to start play. . • To pause or resume play, press • To skip to the previous or next track, press / . Note • To play audio from the connected Apple device, first press to select the USB source. Compatible iPod/iPhone/iPad The USB socket supports the following iPod, iPhone, and iPad models.
6 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power Frequency Response Signal to Noise Ratio Aux Input General information AC power Operation Power Consumption Eco Standby Power Consumption Dimensions - Main Unit Weight - With Packing - Main Unit Model: GFP451DA1825-1 Input: 100 - 240 V~, 50/60 Hz 1.2 A Output: 18 V 2.5 A 10 W < 0.5 W 455 x 165 x 150 mm 3.5 kg 2.
7 Troubleshooting Warning • Never remove the casing of this apparatus. To keep the warranty valid, never try to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting service. If the problem remains unsolved, go to the Philips web site (www. philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available.
• Before you open iTunes, make sure that you have enabled Bonjour service in your PC. Take Windows XP for example: to enable the service, you can click Start>Settings->Control Panel, and doubleclick Administrative Tools-> Services>Bonjour Service, then click Start followed by OK on the pop-up menu. If the problem remains, try to restart the • unit. AirPlay connection failed with Mac or PC Disable the firewalls software and security • software, which may block ports that AirPlay uses to stream content.
© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
