Always there to help you Register your product and get support at www.philips.
Contents 1 Important Help and support Important safety instructions Care for your product Care of the environment 2 Your SoundBar Main unit Remote control Connectors 2 2 2 4 4 5 5 5 7 3 Connect and set up 8 Subwoofer 8 Connect audio from TV and other devices 9 4 Use your SoundBar 10 10 10 11 11 11 12 12 5 Wall mount 13 6 Product specifications 14 7 Troubleshooting 15 8 Notice 16 16 16 Adjust the volume Choose your sound MP3 player USB storage devices Play audio through Bluetooth Auto standby
1 Important Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. other apparatus (including amplifiers) that produce heat. •• Help and support Philips provides extensive online support. Visit our website at www.philips.
Care for your product Use only microfiber cloth to clean the product. Care of the environment Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. Please visit www.recycle.philips.com for additional information on a recycling center in your area. Never dispose of your product with other household waste. Please inform yourself about the local rules on the separate collection of electrical and electronic products and batteries.
OPTICAL: Switch your audio source to the optical connection. AUDIO IN: Switch your audio source to the AUDIO-IN connection (3.5mm jack). AUX: Switch your audio source to the AUX connection. COAX: Switch your audio source to the AUX connection. Bluetooth: Switch to Bluetooth mode. 1 2 3 4 q d (Repeat) Select or turn off repeat/shuffle mode in USB mode. e / (Previous/Next) Skip to the previous or next track in USB mode and Bluetooth mode (only for AVRCP-supported Bluetooth devices).
3 Connect and set up Connect Connect your subwoofer to your SoundBar as described in the quick start guide. This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Connect audio from TV and other devices Play audio from TV or other devices through your Soundbar speakers. Use the best quality connection available on your TV, Soundbar, and other devices.
4 Use your SoundBar This section helps you use the SoundBar to play audio from connected devices. Before you start • Make the necessary connections described in the quick start guide and the user manual. • Switch the SoundBar to the correct source for other devices. Adjust the volume To increase or decrease volume, press +/(Volume). • The Source indicators on the front panel blink once when the volume is set to either minimum or maximum. To mute sound, press (Mute).
4 5 Select and play audio files or music on your Bluetooth device. • During play, if a call is coming, music play is paused. Play resumes when the call ends. • If your Bluetooth device supports AVRCP profile, on the remote control you can press / to skip to a track, or press to pause/resume play. To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active.
6 Product specifications Note •• Specifications and design are subject to change without notice. Amplifier • • • • • FTC total output power: 34W • Left + Right: 16W (1%THD, 4ohm, 300Hz-20kHz) • Subwoofer: 18W (1%THD, 8ohm, 40Hz-70Hz) RMS total output power: 120W RMS (+/0.5 dB, 30% THD) / 96W RMS (+/- 0.
8 Notice This section contains the legal and trademark notices. Notice of compliance This set complies with the FCC rules, Part 15 and with 21 CFR 1040.10. Operation is subject to the following two conditions: a This device may not cause harmful interference, and b This device must accept any interference received, including interference that may cause undesired operation.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved.