Always there to help you Register your product and get support at www.philips.
Contents 1 Important Important safety instructions Care for your product Care of the environment Help and support 2 Your SoundBar Indicators on the main unit Remote control Connectors Wireless speakers Wireless subwoofer 3 Connect and set up Charge speakers Pair up with speakers/subwoofer Place speakers Connect to TV Connect digital devices through HDMI Connect audio from TV and other devices 2 2 3 3 4 5 5 6 6 7 8 9 9 9 10 11 11 11 4 Use your SoundBar 13 13 13 14 14 15 15 5 Wall mount your SoundBar
1 Important • Read and understand all instructions before you use your product. If damage is caused by failure to follow instructions, the warranty does not apply. •• Important safety instructions •• •• •• •• •• •• •• •• •• •• •• •• 2 Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
electrical and electronic products and batteries. The correct disposal of these products helps prevent potentially negative consequences on the environment and human health. The batteries supplied do not contain the heavy metals mercury and cadmium. Nevertheless, in many areas batteries may not be disposed of with your household waste. Please ensure you dispose of batteries according to local regulations. For perchlorate material, special handling may apply. Visit www.dtsc.ca.
HDMI 2: Switch your source to the HDMI IN 2 connection. Remote control c Source buttons OPTICAL: Switch your audio source to the optical connection. COAX: Switch your audio source to the coaxial connection. AUDIO-IN: Switch your audio source to the AUDIO-In connection (3.5mm jack). AUX: Switch your audio source to the AUX connection. Bluetooth: Switch to Bluetooth mode. This section includes an overview of the remote control. a b c j i e h g e Volume control +/-: Increase or decrease volume.
Wireless subwoofer The SoundBar comes with a wireless subwoofer. 3 Connect and set up »» When fully charged, the indicator on the speaker lights up white for 30 seconds. Note This section helps you connect your SoundBar to a TV and other devices, and then set it up. For information about the basic connections of your SoundBar and accessories, see the quick start guide. Note •• For identification and supply ratings, see the type plate at the back or bottom of the product.
4 5 »» If the pairing fails, the indicator on the speaker blinks red slowly. Note •• If your TV is not HDMI ARC compliant, connect If the pairing fails, repeat the steps above. an audio cable to hear the TV audio through your SoundBar. (see 'Connect audio from TV and other devices' on page 11) •• If your TV has a DVI connector, you can use an HDMI/ DVI adapter to connect to TV. However, some of the features may not be available.
Note •• When your Soundbar and TV are connected through HDMI ARC, an audio connection is not required. Option 3: Connect audio through analog audio cables Basic quality audio 1 Option 1: Connect audio through a digital optical cable Using an analog cable, connect the AUX connectors on your SoundBar to the AUDIO OUT connectors on the TV or other device. Best quality audio DVD TV 4 Use your SoundBar Surround sound mode Experience an immersive audio experience with surround sound modes.
Synchronize picture and sound 3 If the audio and video are not synchronized, delay the audio to match the video. 1 Press AUDIO SYNC +/- to synchronize the audio with the video. • AUDIO SYNC + increases the sound delay, and AUDIO SYNC - decreases the sound delay. »» When you change the value of sound delay, the more value/delay you set, the more indicators on the main unit light up. Night mode For quiet listening, decrease the volume of loud sounds when audio is played.
5 Wall mount your SoundBar 6 Product specifications Before you mount your SoundBar on the wall, read all safety precautions. Wall mount notice. • You must detach the surround speakers from the main • • • unit before wall mounting or un-mounting. Koninklijke Philips Electronics N.V. bears no responsibility for improper wall mounting that results in accident, injury or damage. If you have any query, contact Philips Consumer Care in your country.
7 Troubleshooting Warning •• Risk of electric shock. Never remove the casing of the product. To keep the warranty valid, never try to repair the product yourself. If you have problems using this product, check the following points before you request service. If you still have a problem, get support at www. philips.com/support. Main unit The buttons on the SoundBar do not work. • Disconnect the SoundBar from the power supply for a few minutes, then reconnect. Sound No sound from SoundBar speakers.
This device complies with Industry Canada RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio RSS-210.
Specifications are subject to change without notice © 2013 Koninklijke Philips Electronics N.V. All rights reserved.