User's Manual

4
3.1.2 Placing the non-rechargeable batteries
In case of a power failure, the baby unit can run
on four 1.5V R6 AAA alkaline batteries (not included).
Do not use rechargeable batteries. The baby
unit does not have a charging function and
rechargeable batteries discharge slowly when
they are not in use.
B
Warning:
Unplug the baby unit and make sure your hands
and the unit are dry when you insert non-
rechargeable batteries.
D
Note:
The baby unit has an operating time of 3 hours
when you use it on non-rechargeable alkaline
batteries with the night light turned on.
1 Remove the battery compartment lid.
2 Insert four non-rechargeable alkaline batteries.
D
Note:
Make sure the + and - poles point in the
right direction.
II Baby unit
1 Antenna
2 Power-on light
3 Microphone
4 Lens
5 Loudspeaker
6 Base
7 Nightlight and nightlight button
8 Wall-mounting holes
9 Battery compartment lid
10 Socket for appliance plug
11 On/off switch
12 Appliance plug
13 Adapter
3 Preparing for use
IMPORTANT: Read the important safety
instructions carefully before you use the
video baby monitor and keep them for
future reference.
3.1 Baby unit
Always operate the baby unit connected to an
electrical outlet. To guarantee automatic power
backup in case of a power failure, we advise you
to insert non-rechargeable batteries.
3.1.1 Connecting the baby unit
1 Put the appliance plug in the baby unit and
insert the adapter into an electrical outlet.