User's Manual

ManualsBrandsPhilips Electronics Industries ManualsLED & LCD TVsLCD Monitor

Product Information

Product Features • Technical Specifications • Resolution & Preset Modes •

Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification •

Pin Assignment • Product Views • Physical Function

Product Features

150S4FG / 150S4FB

Embedded Power Supply

15-inch color LCD monitor with excellent display performance

Ultra slim frame design

Standard VGA analog input

Embedded universal AC power supply

AUTO adjustment optimizes picture quality

User installable bezel for optional protective cover choice

RETURN TO TOP OF THE PAGE

Technical Specifications*

LCD PANEL

• Type TFT LCD

• Screen size 15" visual

• Pixel Pitch 0.297 x 0.297mm (15.0")

• LCD Panel type

1024 x 768 pixels

R.G.B. vertical stripe

Anti-glare polarizer hardness

• Effective viewing area 304.1 x 228.1mm (15.0")

• Display Colors 16.7M colors

SCANNING

• Vertical refresh rate

56Hz-76Hz

• Horizontal frequency 30kHz-61kHz

VIDEO

• Video dot rate 80 MHz

• Input impedance

Exhibit 3

Installstion and Operating instructions

Summary of content (16 pages)

PAGE 1
Exhibit 3 Installstion and Operating instructions Product Information Product Features • Technical Specifications • Resolution & Preset Modes • Philips Pixel Defect Policy • Automatic Power Saving • Physical Specification • Pin Assignment • Product Views • Physical Function Product Features 150S4FG / 150S4FB Embedded Power Supply z z z z z z 15-inch color LCD monitor with excellent display performance Ultra slim frame design Standard VGA analog input Embedded universal AC power supply AUTO adjustment opt
PAGE 2
- Video 75 ohm - Sync 2K ohm • Input signal levels 700m Vpp • Sync input signal Separate sync Composite sync Sync on Green • Sync polarities Positive and negative • Input Frequency XGA Hsync SVGA Hsync VGA Hsync • Video interface Analog (D-Sub) 48- 61 kHz, Vsync 60 - 76 Hz (N.I.) 35- 50 kHz, Vsync 56 - 75 Hz (N.I.) 31- 38 kHz, Vsync 60 - 76 Hz (N.I.) OPTICAL CHARACTERISTICS • Contrast ratio 400 (typ.) • Brightness 250 cd/m2 (typ.
PAGE 3
7.861 640*480 72.809 37.500 640*480 75.000 35.156 800*600 56.250 37.879 800*600 60.317 48.077 800*600 72.188 46.875 800*600 75.000 49.700 832*624 75.000 48.363 1024*768 60.004 56.476 1024*768 70.069 60.023 1024*768 75.029 RETURN TO TOP OF THE PAGE Automatic Power Saving If you have VESA DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use.
PAGE 4
• Tilt (Forward / Backward) - 5° / 25° • Power supply 100 — 240 VAC, 50/60 Hz • Power consumption 23 W (typ.) • Temperature (operating) 5° C to 40° C • Relative humidity 20% to 80% • System MTBF 50K hrs (CCFL 30Khrs) • Cabinet color 150S4FG: Light Gray 150S4FB: Black * This data is subject to change without notice. RETURN TO TOP OF THE PAGE Pin Assignment The 15-pin D-sub connector (male) of the signal cable: Pin Assignment No. Pin Assignment No.
PAGE 5
Product Views Follow the links to see various views of the monitor and its components.
PAGE 6
Installing your LCD Monitor Your LCD Monitor : Front View Product Description • Connecting to Your PC • The Base • Getting Started • Optimizing Performance Front View Product Description UP and DOWN buttons are used when adjusting the OSD of your monitor LEFT and RIGHT buttons, like the UP and DOWN buttons, are also used in adjusting the OSD of your monitor. BRIGHTNESS hotkey. When the UP and DOWN arrow buttons are pressed, the adjustment controls for the BRIGHTNESS will show up.
PAGE 7
Note: You can check the current display settings by pressing the 'OK' button once. Go into the Product Information. The current display mode is shown on the item called RESOLUTION. z You can also install the Flat Panel Adjust (FP Adjust) program, a program for getting the best performance out of your monitor. This included on this CD. Step-by-step instructions are provided to guide you through the installtion process. Click on the link to know more about this program. More about FP_setup01.
PAGE 8
Connecting to Your PC Your LCD Monitor : Front View Product Description • Accessory Pack • Connecting to Your PC • The Base • Getting Started • Optimizing Performance Accessory Pack Unpack all the parts.
PAGE 9
1) Plug the power cord into monitor firmly. Note: If you use an Apple Macintosh, you need to connect the special Mac adapter to one end of the monitor signal cable 2) Connect to PC (a) Turn off your computer and unplug its power cable. (b) Connect the monitor signal cable to the video connector on the back of your computer. (c) Plug the power cord of your computer and your monitor into a nearby outlet. (d) Turn on your computer and monitor.
PAGE 10
The Base Your LCD Monitor : Front View Product Description • Accessory Pack • Connecting to Your PC • Getting Started • Optimizing Performance Unfold and Fold the Base : Unfold the base • Fold the base Remove the Base : Remove the base Unfold and Fold the Base Unfold the Base 1) Put monitor face down on the safe surface 2) Pull up the base Fold the Base 1) Put monitor face down on the safe surface
PAGE 11
2) Push down the button and fold the base RETURN TO TOP OF THE PAGE Remove the Base Condition: z z for VESA standard mounting applications for optional bases replacement 1) Remove the four screws and then remove the stand from the LCD monitor.
PAGE 12
2) Remove the back cover Note: This monitor accepts a 100mmx100mm VESA-Compliant mounting interface.
PAGE 13
Regulatory Information TCO '95 Information • TCO '95 Environmental Requirements • TCO '99 Information • TCO '99 Environmental Requirements • CE Declaration of Conformity • Energy Star Declaration • Federal Communications Commission (FCC) Notice (U.S.
PAGE 14
- EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment) - EN55024:1998 (Immunity requirement of Information Technology Equipment) - EN61000-3-2:1995 (Limits for Harmonic Current Emission) - EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker) following provisions of directives applicable - 73/23/EEC (Low Voltage Directive) - 89/336/EEC (EMC Directive) - 93/68/EEC (Amendment of EMC and Low Voltage Directive) and is produced by a manufacturing organization on ISO9000 lev
PAGE 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
PAGE 16
Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement. N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques. CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT SUR LE MATERIEL BROUILLEUR DU CANADA.