User's Manual

Sleeping mode
(Suspend, standby, off mode):
At PC mode:
When PC H-Sync or V-Sync do not present for 3 sec. painter
Will tell the sacler and then Scaler will send
“ No Signal Input “ message to Panel to display .
2 second later stand-by pin output “Low “ signal to turn
off S2 for Monitor DPMS .
At PIP mode:
Same as PC mode
6. HDTV input
HD input connector:
One VGA 15 pin D-sub connector is used for HDTV video input.
PIN No. SIGNAL
1 Red/ Pr
2 Green/ Y
3 Blue/ Pb
4 Gnd
5 Gnd
6 Red/Pr GND
7 Green/Y GND
8 Blue/Pb GND
9 NA
10 Sync GND
11 Sense (GND)
12 Factory Txd
13 H-sync(H+V)
14 V-sync
15 Factory Rxd