User's Manual



Specificationsaresubjecttochangewithoutnotice

1.6 RF Pairing Erase
Whenauserneedstoresetthepairingaddressbacktothedefaultaddress,aRFPairingErasecanbe
done.WhenaRFPairingEraseiscompleted,theREMOTECONTROLwillonlyworkwithanunpaired
Receiver(alsowithdefaul taddress). 

1 Press and hold KEYBOARD keys “BACK” and “HOME” for 10 secs.
2 Release the key. REMOTE CONTROL will do a RF Pairing Erase.
3 Once the key is released the POWER LED is briefly off

1.7 Indicator LED
Thereare2LEDsforthisREMOTECONTROL:
1) LED under “POWER” key: “Status” LED
2) LED under “UNLOCK” key: “KEYBOARD” LED
LED Indication Purpose Status Description
“Status”/“KEYBOARD” RF pairing mode Slow blinking (~2.5 Hz)
“Status”/“KEYBOARD” RF pairing successful Fast blinking for 2 secs
“Status”/“KEYBOARD” RF broken link Slow blinking (~tbd Hz)
“Status” Single blink to indicate RF key
transmission (Remote side)
1 short blink when valid key is press on
Remote side
“Status” Battery low indication (Remote side) 1 long blink each time after a valid key
is pressed on Remote side
“KEYBOARD” Single blink to indicate RF key
transmission (Keyboard side)
1 short blink when valid key is press on
keyboard side
“KEYBOARD” Battery low indication (Keyboard side) 1 long blink each time after a valid key
is pressed on keyboard side
*Note:ForotherLEDindicationofotherREMOTECONTROLfeaturestheconfigurationcanbeadjusted.

