Philips Home Control Manual of OVU760001/01 Confidential ©Philips Home Control, 2011 Page 1 of 6
OVU760001/01 Manual (Draft Version) FCC Statement FCC Part 15.19 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
OVU760001/01 Manual (Draft Version) Table of Contents 1. GENERIC FUNCTIONALITY 1.1 1.2 2. GENERAL FUNCTIONALITY ........................................................................ 4 APPLICATION VIEW .................................................................................. 4 RADIO FREQUENCY (RF) FUNCTIONALITY 2.1 3. 4 5 PAIRING AND UNPAIRING ..........................................................................
OVU760001/01 Manual (Draft Version) 1. GENERIC FUNCTIONALITY 1.1 General functionality This product is a Radio Frequency (RF) to Infrared (IR) dongle powered by USB. It receives RF signals and translates them to IR signal and fires it through an IR emitting diode. The purpose is to allow IR receivers to be controlled by RF remotes. This product is not meant to communicate through the USB. 1.2 Application view The RF dongle will first pair with a RF remote before it can be used.
OVU760001/01 Manual (Draft Version) 2. RADIO FREQUENCY (RF) FUNCTIONALITY 2.1 Pairing and Unpairing The dongle is a target device in the pairing procedure. This means that the dongle can only receive requests for pairing and unpairing. The initiator of pairing normally comes from the controller device which is usually the remote controls. For the OVU760001/01 dongle, there is no button so pairing is initiated when the dongle is powered up. The pairing period will last 15 seconds.
OVU760001/01 Manual (Draft Version) 3.
