Product Info

Fiber
Program the remote for your TV
You can program the remote control to operate your TV, as well as the TV Box. Although the Installation
Specialist programmed it for you at installation time, this procedure is provided to help you do it yourself, if
necessary.
Use any of the following methods to program the remote:
TV brand search (recommended):
Turn on the TV using the TV's original remote control.1.
On the Google Fiber TV remote control, press and hold the
tv and ok buttons together for three
seconds.
The
tv button blinks twice and then stays on.
2.
Release both buttons.3.
Enter the 4-digit code for the TV brand.
See
TV brand codes for a list of TV brands and the code for each.
After you enter the fourth digit of the TV brand code, the TV Power button blinks twice and then
stays on.
If it blinks several times and then turns off, the code was invalid. Go back to the previous
step, and try again. If it fails again, try the manual programming method.
4.
Pause for three seconds.5.
Press and hold
tv until the TV turns off.
While you hold the
tv button down, the remote control tests each code for the specified brand
until it finds the right one. When it finds the right code, it turns the TV off.
If the
tv button starts blinking, it means that it tried all of the codes, but none were
successful. Repeat the process. If it fails again, try the manual programming method.
6.