User's Manual

Philips CLS – P&A - Peripherals & Control User Manual Specification
PHILIPS Confidential OTS Multimedia Remote Control RC197xx
URS-197xx-CMK01 13/19 0.5, Proposal
3.1.2 Bluetooth
®
ACTIVE / STANDBY / SLEEP
Set BT Active: (when it is in SLEEP mode)
User action System action
Press ANY key on the Remote
Control.
BT wakes up.
BT LED blinks 1 time per 1 second* to
ON once it is active comment.
Execute ANY key command.
* As there will be a BT connection time of 1 ~ 3 seconds.
Set BT Active: (when it is in STANDBY mode)
User action System action
Press ANY key on the Remote
Control.
BT resumes almost immediately.
BT LED stays ON. At STANDBY LED
STAYS ON.
Execute ANY key command.
3.1.3 Bluetooth
®
auto connection
When the BT wakes up or resumes from SLEEP/STANDBY or come back within range of a
power on paired PC, BT link will be re-connected automatically. No BT re-pairing is needed.
3.1.4 Bluetooth
®
out of range
When the BT is out of range, the BT LED blinks 1 time per 1 second, and go to SLEEP in 10 min
comment if it remains out of range.
3.2 Windows Media Center
For HID specification detail, please refer to [VistaHIDRequirement June 2008 Draft 1]. Except for
Speaker & Microphone, Game, Mouse & Left / Right altogether 5 keys, the rest are available for
Windows Media Center control.
None of the MCE remote control keys is back lighted.
When no key press is detected, the remote control goes on STANDBY, the BT LED stays ON
comment, and after 10 min the remote control goes to SLEEP if the PC is ON but the BT LED
goes OFF. If the PC is in S3, S4 or S5 state, the RC immediately goes into SLEEP, the BT LED
goes OFF.
When the RC is not in Mouse, Game or Speaker & Microphone mode, the RC can send up /
down / left / right via gesturing. These are done via press & hold the Left mouse button and swing
the RC, with a predefined speed & acceleration parameters that trigger sending of the
commands.