User's Manual

Philips CLS – P&A - Peripherals & Control User Manual Specification
PHILIPS Confidential OTS Multimedia Remote Control RC197xx
URS-197xx-CMK01 16/19 0.5, Proposal
When there is no motion senses after 15 seconds, the 3D LED turns OFF. The remote control
goes on STANDBY, the BT LED stays ON. Within 10 min if the remote is lifted up the 3D game
mode and the 3D LED resumes. If no motion senses after 10 min the remote control goes to
SLEEP if the PC is on but the BT LED goes off. The RC goes into SLEEP immediately if the PC
goes to S3, S4 or S5 state, and the BT LED turns OFF.
In Motion Mode:
Game Motion Orange LED turns ON.
The Up/Down/Left/Right remote control keys switched to the format that supports the motion
game application of Up/Down/Left/Right control.
The Mouse L/R keys are switched to A, B controls.
The remote control senses 3 axes raw data, and sends to the PC via Philips defined protocol.
In Motion game mode, the Mouse button / function can only be enabled by press & hold for 1
second, and the handset switch to Mouse mode.
When there is no motion senses after 15 seconds, the Motion LED turns OFF. The remote
control goes on STANDBY, the BT LED stays ON. Within 10 min if the remote is lifted up the
Motion game mode and the Motion LED resumes. If no motion senses after 10 min the remote
control goes to SLEEP if the PC is on but the BT LED goes off. The RC goes into SLEEP
immediately if the PC goes to S3, S4 or S5 state, and the BT LED turns OFF.
When there is no motion senses after 15 seconds, the remote control exits Game mode and the
3D LED turns OFF. The remote control goes on STANDBY, the BT LED blinks 1 time per 1
second, and after 10 min the remote control stays on STANDBY if the PC is on but the LED goes
off. The RC goes into SLEEP immediately if the PC goes to S3, S4 or S5 state, and the BT LED
turns OFF.
3.5 Wireless Handset
Wireless handset function is provided by BT headset profile, the onboard microphone is mapped
to audio-in of audio device of the PC, whereas onboard speaker is mapped to audio-out device.
There is an Orange LED under the
key, LED is ON / OFF when the speaker & microphone
is ON / OFF.
The remote control will have NO power management / time out in speaker & microphone mode.
3.6 Indicator light behaviour
Indicator Status description
Bluetooth
®
status indication
BT LED
Blinks 2 times per 1 second for 3
seconds.
Whenever any key is pressed and BT is
NOT paired with the PC.