User's Manual

LIST

Please refer to your Quick Start Guide or User Guide for complete instructions and in-depth information on

your new DIRECTV

System or go to directv.com.

PROGRAMMING YOUR REMOTE TO RUN YOUR TV

DVR Instructions

PAUSING LIVE TV

REMOTE CONTROL REFERENCE CAR

SELECT

SEARCHING FOR A SHOW

RECORDING A SHOW OR A SERIES

WATCHING A RECORDED SHOW

LIST

DELETING A RECORDED SHOW

LIST

USING COLORED BUTTONS

SELECT

Press LIST to access the shows you’ve already recorded in your Playlist. (Once in your Playlist you can also

access shows DIRECTV has automatically recorded for you in Showcases by pressing the GREEN button.) Use the

black ARROW buttons to highlight the show you want to watch, then press PLAY .

are context sensitive and change function depending on which user screen you are in. Pay close

attention to the on-screen hints to learn the shortcuts. For example, in live TV, YELLOW changes audio tracks from

English to Spanish, etc., depending on the show, while in LIST , YELLOW takes you to the To Do List, showing

you which shows are set to record in the future.

To record the program you’re watching, press RECORD once. To record a show from the Guide, highlight it

and press RECORD once. To record a series automatically, highlight your show in the Guide and press

RECORD twice.

Press MENU on your remote. Use the black ARROW buttons to highlight SEARCH in the Quick Menu. Then press

SELECT . Once you’ve selected a search by title, person, keyword or channel, you can highlight a show to display

the program’s information.

Press PAUSE . Restart the action by pressing PLAY . See opposite side of this card for other DVR controls.

Press MENU , select Settings, then Setup, then Remote, and follow the on-screen directions to program your

remote to run your TV or other connected equipment. See your User Guide for more details.

Press LIST . Use the black ARROW buttons to ﬁ nd the program, then press the DASH button twice to delete.

65007_DTV 1

12/13/06 12:15:38 PM

PAGE 1
REMOTE CONTROL REFERENCE CARD SELECT PROGRAMMING YOUR REMOTE TO RUN YOUR TV Press MENU MENU , select Settings, then Setup, then Remote, and follow the on-screen directions to program your remote to run your TV or other connected equipment. See your User Guide for more details. DVR Instructions PAUSING LIVE TV Press PAUSE II . Restart the action by pressing PLAY . See opposite side of this card for other DVR controls. SEARCHING FOR A SHOW Press MENU MENU on your remote.
PAGE 2
Equipment Controls TV INPUT PWR Press to see signals from the DVD player or other equipment connected to your TV. MODE SWITCH Use with mode switch to turn DIRECTV Receiver or other equipment on/off. Changes remote to control other equipment. Left position controls DIRECTV® Receiver. RECEIVER & TV ON/OFF FORMAT Cycles through HD resolutions and screen format options. This button only works if you have DIRECTV® HD services. ADVANCE Jumps ahead 30 seconds. Hold down to jump forward to the end.
PAGE 3
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.