User's Manual

OCCUSWITCH WIRELESS
LRD1730
Wall Dimmer with wireless communications
Philips Lighting Systems & Controls - GBU Controls
10275 West Higgins Road, Rosemont IL 60018
© 2011 Philips Lighting Electronics North America
Subject to change without notice. All rights reserved.
A Division of Philips Electronics North America Corporation
Tel: Support: 1-800-372-3331
Email: [e-mail]
Website: www.usa.lighting.philips.com
Published and printed in the USA 4/11
Form No.: LRD1730A
Product Warranty
The Philips OccuSwitch™ Wireless products, when properly installed and under normal conditions of use (without overload, abuse or alteration), is warranted to
you, the original user, for a period of two (2) years from the date of original purchase, to be free from defects in materials and workmanship. For further informa-
tion, please contact Philips Lighting Electronics N.A Customer Care at 1-800-372-3331 or www.philips.com/advance.
Wiring Diagram
Multiple Device Configuration
Technical Specification
Operating Voltage: Universal - 120V AC or 277V AC, 60 Hz
Load Rating: Electronic Fluorescent Ballast 120V / 800VA
277V / 1600VA
Incandescent lamps 120V / 800W
Motor load 120V / 0.25HP
Compatible Ballasts: Philips Advance
Mark 10 Powerline - All models
EssentiaLine Powerline - All models
Compatible Lamps: For best dimming performance use Philips Lamps
Wireless Network Protocol: ZigBee Pro 2.4GHz
Universal license free band
Wireless Compatibility: -Multiple devices can be connected
Switches (LRA1721)
Dimmers (LRD1730)
Occupancy Sensors (LRM1743)
Multi Sensors (LRM1769)
Stand alone or multi-way dimming:
Each Wireless dimmers can be configured to operate as a standalone
dimmer or multi-way. By default the dimmers will act as a stand-alone
device: the dimmer only controls the load that is connected to it.
When configured as a multi-way dimmer, all loads are controlled from
any dimmer.
Group Configuration:
Any set of dimmer can be linked to mimic one-another. They all can
be also be linked to the sensors in the room for automatic operation.
Colors: White & Almond
Operating Conditions: For Indoor use only.
Temperature 41°F to 104°F (5°C to 40°C)
Humidity 20% to 85%, (Non-condensing)
Regulatory Compliance
UL, CSA, FCC, RoHS, California Title 24
Physical Dimensions
Length x Width x Depth:
4.13 x 2.56 x 1.79 inches
(105 x 65 x 45mm)
Fits in a standard single-gang wall box.
Can also be installed in a multi-gang configuration if fins are removes.
Broken fin dimmers must be de-rated to 500 watts.