Cut Sheet - Philips - Light To Go
Lighttogo
Philips_DTD_LED_SpecSheet_0318 03/18 page 1 of 2
Site and Area
General Purpose
Arm Mount
Project:
Location:
Cat.No:
Typ e:
Qty:
Notes:
Dusk to Dawn
The Philips LED Dusk to Dawn generation 3 luminaire oers an economical
solution with enhanced generation chip on board LED performance for general
purpose area and security lighting. The luminaire can be direct mounted to vertical
surfaces or mounted onto 1-1/2" O.D. arms. Arm is also available as an accessory
ordered separately. A 120V NEMA twist lock photo cell is included as standard.
This versatile luminaire easily retrots onto existing arms and oers one of the
most aordable and ecient energy saving solutions available.
Housing
One piece die cast aluminum housing with
integral arm mounting hub that can be direct
mounted with lag bolts or t onto 1 1/2" O.D.
mounting arm.
Electrical
Driver eciency (>90% standard). 120-277V
Open/short circuit protection. RoHS
compliant. Surge protector standard, 10KA
per ANSI/IEEE C62.41.2.
LED Board and Array
42 LEDs. Color temperature 4000K +/-275K.
CRI of 70 min. Metal core substrate.
Optical Lens System
Refractive design featuring prisms to spread
light in a symmetrical Type 5 distribution.
Mounting
Standard luminaire mounts to vertical
surface using 1/4" lag bolts or easily ts onto
1/1/2" O.D. round pipe/tube. Direct mount
hardware provided as standard. Mounting
arm with hardware available separately as
an accessory.
Listings
cULus listed to the UL 1598 standard, suitable
for Wet Locations. Suitable for use in ambients
from -30° to 40°C (-22° to 104°F). Product is
DesignLights Consortium® qualied.
Finish
Each standard color luminaire receives a
fade and abrasion resistant, electrostatically
applied, thermally cured, triglycidal
isocyanurate (TGIC) textured polyester
powder coat nish. Standard nish color is
smooth light gray (GY3S).
Warranty
DTD LED luminaires feature a 5 year limited
warranty. See philips.com/warranties for
details.
Specications
Ordering guide example: PDTD-40-NW-G3-AR-5-TLRPC-1-GY3S
Series
PDTD
Wattage
40
LED Color - Generation
NW-G3
Mounting
AR
Distribution
5
Controls
TLRPC
Voltage
1
Finish
GY3S
PDTD Dusk to Dawn LED 40 40W NW-G3 Neutral White,
4000K 70 CRI,
Generation 3
AR Arm Mount 5 Typ e 5 TLRPC Twist-lock receptable
w/ Photocell
1 120 Volts GY3S Light Grey Smooth
Accessories (order separately) • PDTDARMGY3S – Mounting arm with hardware