Automotive Industry Lighting by Philips Lighting lighting solutions that really last
The ever-growing automotive industry covers an extremely wide range of different work conditions: from small workshops to huge factory halls, from the fine precision work to heavy industrial tasks. Philips offers a range of luminaires designed to provide optimal lighting solutions for such conditions. Lighting solutions that not only enhance efficiency but solutions that really last.
Proper construction of a vehicle often requires careful inspection at every step of the production process, with each step demanding very specific lighting conditions. There are six main phases in the production of a an anti-corrosion bath and dried thoroughly. vehicle: stamping, body-in-white (B I W ) assembly, This process is known as cataphoresis. Paint spray paintwork, engine assembly, final assembly and car guns have been replaced by a sophisticated testing and delivery.
stamping Stamping is operated by large, heavy and AUTOMOTIVE INDUSTRY LIGHTING sophisticated machinery in a press shop, often 2 producing high levels of noise, heat, dirt and continuous light lines can be utilized. Industrial even oil. Typical heights in a press shop are 15 to high-bay luminaires should be spaced closely to 18 meters, allowing overhead gantry cranes to prevent poor uniformity due to large obstructions.
body-in-white assembly The body shop is a large metal processing industrial hall with a height of 6 to 9 meters. welded together here. This process is partly fully or prismatic cover. Where luminaires are applied automated by robots, and partly semi-automated. at ceiling heights of below 2 meters (during Fully automated welding lines are often illuminated inspection of vertical surfaces), impact-resistant at higher levels than manual spot-welding locations. luminaires should be specified.
4 ˘ß‡ „⁄ ˆ
paintwork The paint process generally consists of a cleaning and pre-coating line, a primer coating line, the sealing line where the body is made watertight by optics or white louvers. Color rendering is also flexible seals, a wet or dry sanding preparation line, important, as workers must be able to detect the first color coating line, the second and final production errors at an early stage.
6 ˘ß‡ „⁄ ˆ
From rough metal, advanced engine parts are Where strong vibrations are present in heavy manufactured. Aluminium parts are made in a industry, luminaires must withstand this die-casting process, and steel parts are forged in mechanical stress. a typical heavy industrial environment. Small components are manufactured in series in precision Typical lighting installation machine shops.
final assembly The assembly shop houses several sub-assembly lines and the final assembly line. Sub-assembly lines handle the assembly of doors, dashboard, locks etc. On the assembly line, all components, parts and AUTOMOTIVE INDUSTRY LIGHTING sub-assemblies are fitted to the body, both inside and outside.
This section of a car factory often appears like a General lighting provides a basic uniform large maintenance and repair garage. Final exterior illuminance on the total floor, while additional and interior inspection are performed, cars are task lighting facilitates car inspection. fully tested (water tightness, wipers, lights, engine, gearbox, final paint inspection etc.), and repairs Typical lighting installation are made as necessary.
Material and finish Trunking: Hot-dipped galvanised steel; in silver or white color Reflector: White- or silver-colated steel with high quality aluminium mirror Maxos Optics and Louvres:Various types of high-quality aluminium optics and louvers are available Classification IP20 / IP40 / IP54 / IP64 / Class I Product range Please refer to Maxos catalogue or contact any Philips Lighting sales office in your country.
Material and finish Housing: Poly-carbonate; Cover: Poly-carbornate Toggles: Stainless steel; Mounting bracket: Stainless steel TCW097 Classification IP66 / Class I (Pacific II) Product range TCW097 1xTL’D 18W TCW097 2xTL’D 18W TCW097 1xTL’D 36W TCW097 2xTL’D 36W TCW097 1xTL’D 58W TCW097 2xTL’D 58W TCW097 1xTL’5 14W TCW097 2xTL’5 14W TCW097 1xTL’5 28W TCW097 2xTL’5 28W TCW097 1xTL’5 35W TCW097 2xTL’5 35W Gear HF / Coventional / Low-loss Application area in automotive industry Stamping (press shop)
Surface inspection luminaire: Hologram A high performance inspection luminaire for grinding imperfections. Hologram The system comes with 4 x white high-pressure sodium SDW-T 100W lamps with rotationally symmetrical reflectors.
Hong Kong – Philips Electronics Hong Kong Ltd. Lighting Asia Pacific Headquarters 27th Floor, Hopewell Centre 17 Kennedy Road, Wanchai, Hong Kong Tel: + 852 2821 5300 Fax: + 852 2821 5342 E-mail: ltinfo.hongkong@philips.com Australia – Philips Lighting Level 1, Philips House 65 Epping Road, North Ryde NSW 2113, Sydney, Australia Tel: + 61 2 9947 0000 or 1300 304 404 (toll free - local only) Fax: + 61 2 9947 0325 E-mail: ltinfo.australia@philips.com China – Philips Lighting No.
