User's Manual
Table Of Contents
- Introducing IntelliVue Telemetry
- Product Safety
- Transceiver Controls
- Basic Operation
- Alarms
- ECG Monitoring
- ST/AR Arrhythmia & ST Segment Monitoring
- SpO2 Monitoring
- Telemetry Functions at the Information Center & TeleMon
- Pairing with IntelliVue Patient Monitors
- Maintenance, Cleaning & Troubleshooting
- Safety Standards & Specifications
- Accessories
- Sales and Support Offices
Pairing at the Information Center
Pairing with IntelliVue Patient Monitors
10-3
Pairing at the Information Center
You can pair an IntelliVue Patient Monitor (Release B.1 or higher) with the
transceiver at the Information Center. The telemetry data automatically displays
as a permanent overview session in the Telemetry Data Window on the
IntelliVue Patient Monitor. At the Information Center, the telemetry data and
any patient monitor data (e.g. NBP) are integrated in the patient sector.
See your IntelliVue Information Center Instructions for Use or IntelliVue Patient
Monitor Instructions for Use for information on how to pair/unpair devices.
Alarm Behavior with Telemetry Overview
Both the IntelliVue Telemetry System and the IntelliVue Patient Monitor source
alarms. The following tables summarize alarm behavior when a telemetry device
is paired with an IntelliVue bedside monitor (wirelessly or directly connected to
the MP5 using the Telemon/Service Port). For detailed information, see the
IntelliVue Patient Monitor Instructions for Use and the IntelliVue Information
Center Instructions for Use.