User's Manual

Audible Tones
3-12 Transceiver Controls
Adjustable
Sounds
Some transceiver sounds can be set to 5 different volume levels (see “Patient
Configurable Settings in Telemetry Setup” on page 9-4). The adjustable sounds
include SpO
2
Spot Check measurement complete/fail, Check/Standby functions,
and pulse detection tone. The Spot Check and pulse detection tones can be
turned off (muted) on a per patient basis in the Telemetry Setup window.
Sound 5 beep beep
every 5
seconds
Indicates transceiver is out of range or not
associated with a sector. Sound stops when
contact is re-established with the Information
Center, or it can be silenced by pressing the
Check button for six seconds.
Sound 6 beep beep
every 2
seconds
Indicates that the leadset is not inserted
correctly.
Auditory
Information
Signal Sound How Used
Auditory
Signal
(sound) Function How Used
Sound 1
(beep)
Spot Check Announces a successful SpO
2
Spot Check
measurement.
Sound 1
(beep)
No Mute
Check
Button
Confirms contact with the Information Center.
Sound 2
(low pitch
tone)
Pulse
Detection
Tone
Indicates pulse during SpO
2
Spot Check
measurement.