User's Manual
Table Of Contents
- Introducing IntelliVue Telemetry
- Product Safety
- Transceiver Controls
- Basic Operation
- Alarms
- ECG Monitoring
- ST/AR Arrhythmia Monitoring
- SpO2 Monitoring
- Telemetry Functions at the Information Center & TeleMon
- Telemetry Functions at the Information Center
- Telemetry Controls in the Patient Window
- Locating the Transceiver (Find Device)
- Viewing Device Location in the Patient Window (optional)
- Viewing Device Location History (optional)
- Using the Device Location Client (optional)
- Patient Configurable Settings in Telemetry Setup
- Unit- Configurable Settings
- RF Auto Shutoff
- Transceiver Operation when Connected to TeleMon
- Telemetry Functions at the Information Center
- Pairing Monitoring Devices
- Maintenance, Cleaning & Troubleshooting
- Safety Standards & Specifications
- Accessories
- Sales and Support Offices
Selecting a SpO
2
Sensor
8-10 SpO
2
Monitoring
To use the chart:
Find the patient’s weight on the vertical axes. On the horizontal axis at this
weight, the shaded areas indicate that the sensor is a “best choice” for the
patient. Unshaded areas indicate a “good choice.” For example, the best
reusable sensor for a 50 kg patient is the M1191A, applied to the finger or toe.
Alternatively, you could use M1194A applied to the ear. For a complete listing
of available sensors, see “SpO
2
Accessories” on page A-6.
Selecting an SpO
2
Sensor
Preferred sensor types
Alternative sensor types
Disposable
sensor
M1192A M1191B M1194A
Philips
M1901B
N-25
N
M1903B
D-20
P
M1904B
D-25
A
110
88
66
44
33
Pedi
Adult
Patient
Weight
( kg )
50
40
30
20
15
Pedi
Adult
Adult
Pedi
Adult
Patient
Weight
( lb )
Pedi
Pedi
Pedi
Adult
Oxisensor
OxiMax
M1196A
Reusable
sensor